Rotel RX-880 specifications

Category : Receiver

Brand : Rotel

General

connectors

Technical data

amplifier

FM Radio

Radio

special features

for More models from the Stan-Curtis series:

number of inputs:
- antenna: AM, FM 300, and 75 643961b8da111c0a15d770a1109a86d4s
- Phono MM: 2.5 mV 50 k643961b8da111c0a15d770a1109a86d4
- Tape 1+2 In: 150mV at 27 k643961b8da111c0a15d770a1109a86d4
number of outputs:
- set of headphones to the Front: 4 - 600 643961b8da111c0a15d770a1109a86d4s
- Tuner out
- Tape 1+2 out
- speakers: 2 pairs of 4 - 16 643961b8da111c0a15d770a1109a86d4s
  - can be separately switched

headphones to Front: 4 - 600 643961b8da111c0a15d770a1109a86d4s
Tuner out
Tape 1+2 out
speakers: 2 pairs of 4 - 16 643961b8da111c0a15d770a1109a86d4s
- can be separately switched

rated power 20Hz - 20kHz, according IHF-a:
- 8 643961b8da111c0a15d770a1109a86d4: 80W at <0,009% THD
- 4 643961b8da111c0a15d770a1109a86d4: 140W at <0,009% THD
dynamic output a 1kHz sine in accordance with DIN:
- 8 643961b8da111c0a15d770a1109a86d4s: 60W 1% THD
- 4 643961b8da111c0a15d770a1109a86d4s: 120W at 1% THD
total harmonic distortion IHF-a: <0,01%
damping factor: 47 at 1kHz into 8 643961b8da111c0a15d770a1109a86d4s
inter-modulation (TIM): <0,009%
- 60Hz : 7kHz = 4 : 1
frequency response IHF-a:
- Phono: 20Hz - 15kHz +/-0.3 dB RIAA-Standard
- Tape: 5Hz - 70kHz -1/+0 dB
Signal-to-noise ratio according IHF-a:
- Phono: 80dB
- Tape out: 95dB
control:
- Bass: +/- 10dB at 100Hz
- sound in the Middle: +/- 10dB at 1kHz
- height: +/- 10dB at 10kHz
Loudness: switchable
- +7dB at 100Hz and +4 dB at 10kHz
Low Filter (Subsonic): switchable
- -3dB at 20Hz

frequency: 88 - 108 MHz
input sensitivity (Mono): 10,2 dBf/1,8 µV
sensitivity according to DIN: 1,3 µV for 26dB SNR at 75643961b8da111c0a15d770a1109a86d4
minimum sensitivity 50dB SNR:
- Mono: 14,6 dBf in 3µV
- Stereo: 37,2 dBf in 40µV
signal-to-noise ratio (SNR) at 65dBf: Mono: 85dB / Stereo: 80dB
total harmonic distortion (THD) at 65dBf: (Mono/Stereo)
- 100Hz: 0,08%/0,1%
- 1kHz: 0,08%/0,1%
- 6kHz: 0,1%/0,2%
frequency response: 30Hz - 15kHz -2/+0 dB
reception ratio: 1.0 dB
adjacent channel rejection: 60dB at +/-400kHz
interference suppression: 80dB
mirror frequency attenuation: 75dB
ZF-loss: 95dB
ON-attenuation: 60dB
Muting threshold: 20µV
channel separation in Stereo:
- 100Hz: 40dB
- 1kHz: 45dB
- 10kHz: 35dB
pilot tone attenuation: 40dB
SCA rejection: 65dB
station memory: 8