SABA 7140 specifications

Category : Receiver

Brand : SABA

General

Connections

Technical data

Amplifier

(Phono magn.)

Tuner

number of inputs:
- Phono MM: 35 mV / 47 K-ohms
- 2x tape, Aux, Monitor: 200 mV / 470 ohms
- antenna FM (75/300 643961b8da111c0a15d770a1109a86d4), MW
number of outputs:
- 2x Band
- 1x headphone
- 2 pairs of Speakers

continuous power (at THD)
- 8 643961b8da111c0a15d770a1109a86d4: 2x 38 W
- 4 643961b8da111c0a15d770a1109a86d4: 2x 50 W (DIN)
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4: 2x 55 W
- 4 643961b8da111c0a15d770a1109a86d4: 2x 70 W
THD: 0,03% (at rated power)
damping factor:
- 26 for 4 643961b8da111c0a15d770a1109a86d4s
- 52 for 8 643961b8da111c0a15d770a1109a86d4s
frequency response:
- 18 - 50,000 Hz (±1.5 dB)
- power bandwidth: 10 - 80.000 Hz (-3 dB)
external voltage distance:(Tape, Aux, Monitor)
- 79 dB at rated power
- 58 dB at 2x 50 mW

- 62 dB at rated power
- 57 dB at 2x 50 mW
stereo channel separation:
control the sound:
- Bass: ±15 dB at 60 Hz
- height: ±15 dB at 15 kHz
- presence-switch: +6 dB 3 kHz
Loudness: Yes
High Filter : 8 kHz (12 dB/octave)
Low Filter (Subsonic): 60 Hz (12 dB/octave)
Mute: FM Muting
Direct/Line-Straight: no

receiving: FM, MW
frequency:
- FM: 87.5 - 108 MHz
- MW: 520 - 1.630 kHz
frequency response:
- 20 - 15000 Hz
input sensitivity:
- FM Mono: 0,55 µV at 26 dB signal to noise ratio
- FM Stereo: 8 µV for 46 dB signal to noise ratio
- MW: 4
total harmonic distortion:
- FM: 0,2% / 0,25% (Mono/Stereo)
signal-to-noise ratio: (external voltage)
- FM: 70 / 67 dB (Mono/Stereo)
channel separation:
- FM: 40 dB (1 kHz)
selectivity:
- FM: 80 dB
- MW: 54 dB
frequency selection: 1,0 dB (1 mV, 300 643961b8da111c0a15d770a1109a86d4)
in addition to the wave selection:
mirror frequency attenuation:
- FM: 95 dB
- MW: 52 dB
ZF-loss:
ON-suppression: 55 dB (1 mV, 300 643961b8da111c0a15d770a1109a86d4)