SABA 9141 tc specifications

Category : Receiver

Brand : SABA

General

Connections

Technical data

Receiver part (tuner)

Amplifier part

Definitions according to DIN 45,500, as far as the above refer to the FM receiver part and the amplifier.

(Taken from the original BDA, logically supplemented)

Special equipment

Other models of the same series:

  • Manufacturer: SABA GmbH, VS-Villingen
  • Model: Saba Ultra Hifi professional Receiver 9141 telecommander
  • Years of construction:
  • Made in: Germany
  • Color: anthracite/sibermetallic or anthracite/matte black
  • Remote control: Remote control TC 91 (infrared)
  • Power connection: 220 V, 50 Hz
  • Power consumption: 350 watts
  • Dimensions: 618 x 135 x 342 mm (W x H x D)
  • Weight: 13,5 kg
  • New price approx.:
  • Number of inputs: 5
    • Monitor, Tape 1, Tape 2, Phono magn.
  • Number of outputs:
    • Tape 1/2
  • Monitor, Tape 1, Tape 2, Phono magn.
  • Tape 1/2
  • Antenna inputs:
    • FM (FM) DIN 45325 coax jack / 75 ohm or DIN 45316 / 300 ohm
    • AM (MW) DIN 45315
  • Wave ranges (frequencies): < ul>
  • FM: 87.5 - 108 MHz
  • MW: 520 - 1630 kHz
  • Intermediate Frequencies:
    • FM (FM): 10.7MHz
    • AM (MW): 461 kHz
  • Sensitivities:
    • FM
      • Mono: 0.6 µV for 26 dB noise level (40 kHz stroke)
      • Stereo: 20 µV for 46 dB noise level (40 kHz stroke + pilot)
      • Stereo threshold 5 µV
    • MW:
      • 4 µV for 10 dB noise level
      • 30 µV for 26 dB Signal-to-noise ratio (at 600 kHz, modulation 30 % / 400 Hz)
  • Bandwidth:
    • FM-ZF: 140 kHz
    • AM-ZF: 4 kHz
  • Selectivity:
    • FM-ZF 80 dB
    • AM-ZF 52 dB
  • Mirror selection:
    • FM 60 dB
    • AM 46 dB
  • Limiting input (muting threshold): 0.4 µV at - 3 dB
  • AM suppression: 60 dB at 1 mV input voltage
  • Large signal behavior: 85 dB
  • Common-wave selection: 1.0 dB at 1 mV input voltage
  • Total harmonic distortion:
    • FM mono: 0.2 %
    • FM stereo: 0.25% (1 mV, 1000 kHz, 40 kHz stroke)
  • External voltage range:
    • FM mono: 71 dB
    • FM stereo: 67 dB
  • Noise voltage range:
    • FM mono: 71 dB
    • FM stereo: 67 dB
  • Transmission range (frequency response): 20...To 14,500 Hz ± 3 dB
  • pilot tone suppression: 60 dB
  • sub-carrier suppression: 60 dB
  • Crosstalk:
    • 40 dB (1,000 Hz)
    • 35 dB (250 - 6.300 Hz)
  • station memory: 7 x FM
  • RDS: --
  • FTZ-number: U 104
    • FM (FM) DIN 45325 coax female to 75 643961b8da111c0a15d770a1109a86d4 or DIN 45316 / 300 643961b8da111c0a15d770a1109a86d4s
    • AM (MW) DIN 45315
    • FM: 87.5 - 108 MHz
    • MW: 520 - 1630 kHz
    • FM (FM): 10.7 MHz
    • AM (MW): 461 kHz
    • FM
      • Mono: 0,6 µV at 26 dB signal to noise ratio (40 kHz deviation)
      • Stereo: 20 µV for 46 dB signal to noise ratio (40 kHz deviation + Pilot )
      • stereo threshold of 5 µV
    • MW:
      • 4 µV for 10 dB signal to noise ratio
      • 30 µV at 26 dB signal to noise ratio (at 600 kHz, Modulation, 30 % / 400 Hz)
    • Mono: 0,6 µV at 26 dB signal to noise ratio (40 kHz deviation)
    • Stereo: 20 µV for 46 dB signal to noise ratio (40 kHz deviation + Pilot )
    • stereo threshold of 5 µV
    • 4 µV for 10 dB signal to noise ratio
    • 30 µV at 26 dB signal to noise ratio (at 600 kHz, Modulation, 30 % / 400 Hz)
    • FM-ZF: 140 kHz
    • ON-ZF: 4 kHz
    • FM-ZF 80 dB
    • ON-ZF 52 dB
    • FM 60 dB
    • AT 46 dB
    • FM-mono: 0,2 %
    • FM-stereo: 0,25% (1 mV, 1000 kHz, 40 kHz deviation)
    • FM-mono: 71 dB
    • FM-stereo: 67 dB
    • FM-mono: 71 dB
    • FM-stereo: 67 dB
    • 40 dB (1,000 Hz)
    • 35 dB (250 - 6.300 Hz)
    • output power:
      • 2 x 48 W power rating (RMS ) at 4 643961b8da111c0a15d770a1109a86d4s
      • 2 x 36 W rated power (sine wave power) 8 643961b8da111c0a15d770a1109a86d4s
      • 2 x 70 W of music power into 4 643961b8da111c0a15d770a1109a86d4s
      • 2 x 50 W music power output at 8 643961b8da111c0a15d770a1109a86d4s
    • total harmonic distortion: 0.05% at rated power
    • Intermodulation: 0,25% (250 / 8,000 Hz, 4:1) at rated output
    • frequency response (frequency response): 25 - 40.000 Hz (± 1.5 dB)
    • power bandwidth: 10 - 80.000 Hz (- 3 dB)
    • input sensitivity for rated power (at 1,000 Hz; total gain)
      • Phono magn. / 47 k643961b8da111c0a15d770a1109a86d4 = 3 mV
      • Band 1, band 2, Monitor / 470 k643961b8da111c0a15d770a1109a86d4 = 200 mV
    • Overload resistance (at 1,000 Hz and 1 %total harmonic distortion)
      • Phono magn. 80 mV / 28.5 dB
      • Band 1, band 2, Monitor 5.5V / 28.5 dB
    • Equality of channels:
      • ± 1.5 dB (volume 0 - 40 dB)
    • Balancer range:
      • - 80 dB per channel
    • Tone control:
      • Lows: ± 15 dB (60 Hz)
      • Highs: ± 15 dB (15,000 Hz)
    • Presence key:
      • + 6.5 dB (3,150 Hz)
    • Noise filter: - 3 dB at 8,000 Hz (slope 12 dB / octave)
    • Rumble filter: - 3 dB at 60 Hz (slope 12 dB / octave)
    • Phono equalization according to RIAA 3180 / 318 / 75 µs, compliance with ± 0,5 dB
    • External voltage margin Tape input
      • 75 dB at rated power
      • 50 dB at 2 x 50 mW (input terminated with 47 k // 220 pF)
    • crosstalk attenuation Tape input
      • 56 dB (1.000 Hz)
      • 50 dB (250 - 10,000 Hz) (input terminated with 47 k // 220 pF)
    • Input Phono magn.
      • 62 dB (1,000 Hz)
      • 46 dB (250 - 10,000 Hz) (input termination 2.2 k643961b8da111c0a15d770a1109a86d4)
    • Attenuation factor:
      • 30 for 4 ohms
      • 60 for 8 ohms
    • Outputs:
      • 2 Stereo speakers 4 - 16 643961b8da111c0a15d770a1109a86d4 (switchable)
      • 2 Additional stereo speakers 4 - 16 643961b8da111c0a15d770a1109a86d4 (switchable)
      • 2 Stereo headphones 100 - 2,000 ohm, DIN 45 327
      • 2 Tape outputs (band 1, Band 2) Level 0.7mV / k643961b8da111c0a15d770a1109a86d4 (15 kHz stroke)
      • 1 Monitor output level 10 mV / k643961b8da111c0a15d770a1109a86d4 ( 15 kHz stroke)
    • 2 x 48 W rated power (sine power) at 4 ohms
    • 2 x 36 W rated power (sine power) at 8 ohms
    • 2 x 70 W Music power at 4 ohms
    • 2 x 50 W Music power at 8 ohms
    • Phono magn. / 47 k643961b8da111c0a15d770a1109a86d4 = 3 mV
    • Band 1, Band 2, Monitor / 470 k643961b8da111c0a15d770a1109a86d4 = 200 mV
    • Phono magn. 80 mV / 28,5 dB
    • Band 1, Band 2, Monitor 5.5 V / 28,5 dB
    • ± 1.5 dB (volume 0 - 40 dB)
    • 80 dB per channel
    • Deep: ± 15 dB (60 Hz)
    • height: ± 15 dB (15,000 Hz)
    • + 6.5 dB (3.150 Hz)
    • 75 dB at rated power
    • 50 dB at 2 x 50 mW (input 47 k // 220 pF completed)
    • 56 dB (1,000 Hz)
    • 50 dB (250 to 10,000 Hz) (input 47 k // 220 pF
    • 62 dB (1,000 Hz)
    • 46 dB (250 to 10,000 Hz) (Input load is 2.2 k643961b8da111c0a15d770a1109a86d4)completed)
    • 30 for 4 643961b8da111c0a15d770a1109a86d4s
    • 60 for 8 643961b8da111c0a15d770a1109a86d4s
    • 2 Stereo speakers 4 - 16 643961b8da111c0a15d770a1109a86d4s (switchable)
    • 2 Stereo external speaker 4 - 16 643961b8da111c0a15d770a1109a86d4s (switchable)
    • 2 Stereo headphone 100 - 2.000 643961b8da111c0a15d770a1109a86d4, DIN 45 327
    • 2 tape outputs (Band 1, Band 2) level of 0.7 mV / 643961b8da111c0a15d770a1109a86d4 (15 kHz deviation)
    • 1 Monitor output level of 10 mV / 643961b8da111c0a15d770a1109a86d4 (15 kHz deviation)
    • remote control (IR):
      • on / Off (stand by), Ton-Stop (Mute)
      • volume, Bass, treble, Balance
      • Phono, tape 1, tape 2, AM, FM, FM 1 - 7
    • on / Off (stand by), Ton-Stop (Mute)
    • volume, bass, treble, Balance
    • Phono, tape 1, tape 2, AM, FM, FM 1 - 7
    • connection for external, programmable antenna rotor
    • Front-main power switch, Stand-By,
    • speaker selector switch 0 – 1 – 2 – 1+2
    • noise filter, subsonic filter, presence button
    • analog frequency display FM / AM transmitter
    • analog tune/field strength indicator, In the middle-meter (FM-Mitte), FM Pilot , AFC
    • LED Display for volume, bass, treble, Balance
    • DIN connector (5-pin.-Stereo) for Phono (rear), Band 1 (rear), Monitor (rear), Band 2 (front)
    • DIN speaker connector 2 x 2 rear
    • Stereo jack Headphone 2 x Front

    SABA 9141 tc


    Comment:



    Comment box:


    SABA 9141 tc relate