SABA 9240 specifications

Category : Receiver

Brand : SABA

General

connectors

Technical data

amplifier

Tuner

number of inputs:
- Phono MM: 1.5 mV / 47 K-ohms
- 2x tape, Aux, Monitor: 270 mV / 470 ohms
- antenna FM (75/300 643961b8da111c0a15d770a1109a86d4), MW
number of outputs:
- 2x Band
- 2x headphones
- 3 pairs of Speakers

the duration of the performance (total harmonic distortion)
- 8 643961b8da111c0a15d770a1109a86d4: 2x 57 W
- 4 643961b8da111c0a15d770a1109a86d4: 2x 70 W (DIN)
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4s:
- 4 643961b8da111c0a15d770a1109a86d4: 2x 120 W
THD: 0,03% (at nominal power)
damping factor:
frequency response:
- 15 - 50,000 Hz (±1.5 dB)
- power bandwidth: 10 - 80.000 Hz (-3 dB)
signal-to-noise ratio:
stereo channel separation:
control:
- Bass: ±15 dB at 60 Hz
- height: ± the sound;15 dB at 15 kHz
- presence-switch: +6 dB 3 kHz
Loudness: Yes
High Filter : 8 kHz (12 dB/octave)
Low Filter (Subsonic): 60 Hz (12 dB/octave)
Mute: FM Muting
Direct/Line-Straight: no

receiving: FM, MW
frequency:
- FM: 87.5 - 104 MHz
- MW: 520 - 1.630 kHz
frequency response:
input sensitivity:
- FM Mono: Of 0.55 µV at 26 dB signal to noise ratio
- FM Stereo: 8 µV for 46 dB signal to noise ratio
- MW: 4
total harmonic distortion:
- FM: 0,2% / 0,25% (Mono/Stereo)
signal-to-noise ratio: (external voltage)
- FM: 64 / 62 dB (Mono/Stereo)
channel separation:
- FM: 40 dB (1 kHz)
selectivity:
- FM: 80 dB
- MW: 54 dB
frequency selection: 1.0 dB (1 mV, 300 643961b8da111c0a15d770a1109a86d4)
in addition to the wave selection:
mirror frequency attenuation:
- FM: 95 dB
- MW: 52 dB
ZF-attenuation:
ON-suppression: 55 dB (1 mV, 300 643961b8da111c0a15d770a1109a86d4)
station memory: no (model "9240 S": six)