SABA HiFi Studio I specifications

Category : Receiver

Brand : SABA

General

connectors

Technical data

amplifier

Tuner

special features

Other models from the same series:

number of inputs:
- Phono MM: 1.5 mV / 47 K-ohms
- Phono Stone: 35 mV / 68 k643961b8da111c0a15d770a1109a86d4
- Band: 100 mV / 47 K-ohms
number of outputs:
- Band: 15 mV / 47 K-ohms
- 2 pairs of Speakers

the duration of the performance (total harmonic distortion)
- 8 643961b8da111c0a15d770a1109a86d4s:
- 4 643961b8da111c0a15d770a1109a86d4:
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4s:
- 4 643961b8da111c0a15d770a1109a86d4:
total harmonic distortion: 1% (at nominal power)
damping factor: 20 (4 643961b8da111c0a15d770a1109a86d4)
frequency response:
- 30 - 20,000 Hz (±1.5 dB)
- 20 - 40,000 Hz (±2 dB)
- power bandwidth: 20 - 30,000 Hz
signal-to-noise ratio: (external voltage, 2 x 50 mW)
- Phono, tape: > 50 dB
stereo channel separation: > 50 dB (1 kHz)
control:
- Bass: +12/-20 dB at 40 Hz
- treble: +12/-15 dB at 20 kHz
Loudness:
High Filter : -12 dB at 15 kHz
Low Filter (Subsonic): -12 dB at 25 Hz
Mute:
Direct/Line-Straight: -

receiving: FM, KW, MW, LW
frequency:
- FM: 87 - 104 MHz
- KW: 5,93 to 6.25 MHz
- MW: 510 - 1630 kHz
- LW: 140 - 350 kHz
frequency response: 50 - 16,000 Hz
input sensitivity:
- FM: 2/10 µV (Mono/Stereo, 26 dB signal to noise ratio)
- MW: 4 µV
total harmonic distortion:
- FM: 1,5%/2% (Mono/Stereo)
signal-to-noise ratio: (external voltage)
- FM: 64/61 dB (Mono/Stereo)
channel separation: >35 dB (1 kHz)
selectivity:
frequency selection:
in addition to the wave selection:
mirror frequency attenuation:
ZF-attenuation:
ON-suppression:
output level:
RDS: no
station memory: 6 (VHF)