Pioneer CT-S 740 S specifications

Category : Dolby-S

Brand : Pioneer

General

connectors

Tech nical data

special features

2 inputs:
- RCA/RCA R+L
- Pioneer system Jack 3,5 mm
3 outputs:
- RCA/RCA R+L
- headphone 6.35 mm (adjustable)
- Pioneer system Jack 3,5 mm

heads: 3
motor: 3
flutter: 0.023% (WRMS , JIS) 0,056% (DIN)
transmission range:
- type I: 20 - 20,000 Hz
- type II: 20 - 20,000 Hz
- type IV: 20 - 25,000 Hz
total harmonic distortion: <= 0.6%,(at -4 dB, 160 nwb/m)
signal-to-noise ratio: >= 60 dB
Auto-Reverse: no
title search: Yes
noise reduction: Dolby B, C, S
Dolby HX-Pro
MPX-Filter : Yes
Fader: no
Pitch-control: no
CD-Synchro recording: Yes
The device is in "Power Off" only in Standby mode (Display is on)

Pioneer Reference-Master-drive (Dual -Capstan)
3 heads with tape control / monitor circuit
3 engines (Capstan, Winding, Servo)
motor-operated cassette compartment (Open and Close)
belt loop prevention automatic (ATL C)
Dolby B/C/S noise reduction
calibration computer Super Auto BLE XD - improved measurements in 4 frequency points
Flex-System (auto. Height correction for old, dull bands)
High-resolution fluorescent display, switchable
Electronic 4-digit counter, numeric and real-time, remaining time, memory
"Meter Range": switching resolution of the level display
Level meter with peak hold function
Automatic band type detection
CD -Synchronous recording with Pioneer CD players
MPX filter (switchable)
Timer -Pre-configuration for recording and playback
can be controlled remotely in the Pioneer system (with extra cable) - then controllable with Pioneer receivers and amplifiers

Successor model:
- none in the 7 series. in 1998, the Pioneer CT-S 670 D started with single-capstan tape running, but A /D converters and digital input

none in the 7 series. in 1998, the Pioneer CT-S 670 D started with single-capstan tape running, but A/D converters and digital input