Tascam 388 specifications

Category : Tape machines

Brand : Tascam

General

Tech nical data

MIXER

MONITOR SECTION

RECORDER

  • Manufacturer: Tascam
  • Model: TASC AM STUDIO 8 (Model 388)
  • Type: 8-track Tape machine with 8 channel mixer, recorder, 1/4" on 18cm coils, 19 cm/ sec
  • Years of construction: 1984 - 1989
  • Manufactured in: Japan
  • Color: Black
  • Dimensions (WxHxD): 837 x 219 x 641 mm
  • Weight: 38 kg
  • Factory price: 9'467 DM
  • Each input channel has:
  • < li>XRL symm. Input micro (-70 dBV to -35dBV)
  • 6.3mm jack UNE input (-10 dBV)
  • MIC Trim control
  • Input selector switch (MIC-UNE-RMX)
  • 6.3mm jack additional send/receive
  • 3-band Equalizer
    • (50 Hz-1kHz/ 500 Hz-5 kHz/2.5kHz-15 kHz, +/- 12dB)
  • Overload LED Display
  • AUX Pre/Post switch and Send Level Controller
  • EFFECT Send Level Controller
  • PGM 1 -8 U.L/R Sum Rail Mapping Switch & Pan Pot
  • Soft-running 60mm Faders
  • (50Hz-1kHz/500Hz-5kHz/2.5kHz-15kHz, +/-12dB)
  • PROGRAM BUS (x 8):
  • ODD and EVEN Master Faders
  • PGM BUSS Input 1-8
  • RCA output jacks (-10 dBV) for each PGM sum rail
  • STEREO BUS:
  • Receives signal from the input channel when one or more L/R assignment switches of the input channels are actuated.
  • Receives signal from the program sum rails or the tracks of the recorder via monitor gain and pan pots when no L/R assignment switch is activated
  • Master Fader
  • Stereo sum input (L&R)
  • Mono switch
  • XRL output jacks with symm./unsymm. Switch (+4dBm) and RCA jacks (-10 dBV)
  • AUX BUS (1 x)
  • Receives signal from the channel (pre or post)
  • Master level control
  • 6.3mm jack (OdBU) and RCA (-IOdBV) output jacks
  • AUX sum rail input
  • EFFECT SEND (x1)
  • Receives signal from channel (post)
  • Master level control
  • 6.3mm jack (OdBu) and RCA (-IOdBV) output jacks
  • Effect sum rail input
    EFFECT RETURN (x2)
  • The TASC AM 388 has two independent EFFECT RETURN circuits.
  • The return signal coming from the 6.3mm jack jack reaches the STEREO sums via the gain control and pan-pot
  • RCA MONITOR OUT jacks (-10 dBV) and 2 stereo headphone jacks
  • The listening signal STEREO, AUX or EFFECT is determined by the monitor selection buttons
  • Level control effective both on MONITOR OUT and also on the headphone jacks.
  • 100mW + 100mW Headphone output power (80hm)
  • Band: 1/4 inch, 1 mil
  • 8-track, 8-channel
  • 19cm/s Band speed *18cm coils (7")max.
  • 3 motors, 2 heads
  • Built-in dbx noise reduction with switch for CH. 1-4 (ON/OFF), CH. 5-8 (ON/OFF) and CH. 8 (DEFEAT)
  • The drive is fully controlled with a tape servo
  • Real-time counter
  • Locator functions: zero return (RTZ), point of intersection search (STC)
  • Block repetition between zero and cue point
  • TAPE LOAD mode for easy tape handling, to avoid independent tape unwinding.
  • Tape output jacks (1 - 8)
  • PITCH control
  • Speed selector switch VARI/FIX/EXT
  • Complete drive control logic
  • Additional connection for an SMPTE interlock system or optional auto locator AQ - 65
  • Possibility of drive remote control by optimal remote control device RC -71
  • Possibility of remote-controlled "punch in/punch out" with optimal additional device RC - 30 P
  • Pitch fluctuations: 0.05% WRMS
  • Frequency response over all: 35 Hz-15 Hz, +/-3dB,-10VU
  • Signal-to-noise ratio: 90dB w/dbx
  • Total harmonic distortion (THD): less than 1%
  • DBX :
  • Tascam DX-2
  • Tascam DX-4
  • Tascam DX-8
    • Picture: TASC AM STUDIO 8 (model 388)
    • Excerpt from brochure: TASC AM STUDIO 8 (Model 388)

    Tascam 388

    Tascam 388


    Comment:



    Comment box:


    Tascam 388 relate