Min.- Input level: - 60 dBV (1 mV) at max. TRIM, at max. Channel Fader
Max.-Input level: + 6 dBV (2 V) at min. TRIM
Source impedance: 10 kOhm or below
Input impedance: 50 kOhm
Nominal input level:
Microphone: - 50 dBV (3 mV) at max. TRIM
Line: - 10 dBV (0.3V) at min. TRIM
Min.- Input level: - 60 dBV (1 mV) at max. TRIM, at max. Channel Fader
Max.-Input level: + 6 dBV (2 V) at min. TRIM
Microphone: - 50 dBV (3 mV) at max. TRIM
Line: - 10 dBV (0.3V) at min. TRIM
Line input (x 2):
Input impedance: 10 kOhm
Nominal input level: - 10 dBV (0.3V)
Input impedance: 10 kOhm
Nominal input level: - 10 dBV ( 0.3V)
Line output (x 2), Effect output (x 1):
Output impedance: 100 ohms
Nominal load impedance: 10 kOhm
Min.-Load impedance: 2 kOhm
Nominal output level: - 10 dBV (0.3V)
Output impedance: 100 ohm
Nominal load impedance: 10 kOhm
Min.- Load impedance: 2 kOhm
Nominal output level: - 10 dBV (0.3V)
Effect return:
Input impedance: 10 kOhm
Nominal input level: - 10 dBV (0.3V)
Input Impedance: 10 kOhm
Nominal input level: - 10 dBV (0.3V)
Headphone Output (Stereo x 1):
Nominal Output impedance: 8 ohm
Max Output level: - 100 mW
Nominal Output Impedance: 8 ohms
Max Output Level: - 100 mW
Equalizer:
Type: Shelving Equalizer
Frequencies:
100 Hz (lows)
10 kHz (highs)
Raising/Lowering: ± 10 dB
Type: Shelving Equalizer
Frequencies:
100 Hz (lows)
10 kHz (highs)
Raising/lowering: ± 10 dB
100 Hz (bass)
10 kHz (treble)
Recording channels: 4
Playback channels: 4
Noise reduction: dbx type II (all tracks)
Sync output:
Output impedance: 100 ohms
Nominal load impedance: 10 kOhm
Min.-Load impedance: 2 kOhm
Nominal output level: - 10 dBV (0.3V)
Output impedance: 100 ohm
Nominal load impedance: 10 kOhm
Min.-Load impedance: 2 kOhm
Nominal output level: - 10 dBV (0.3V)
Frequency response (Fn. 2) (Recording/playback): 40 Hz – 12,5 kHz, ± 3 dB (without dbx)
Interference voltage distance (Fn. 2) (at 3 % total harmonic distortion): 85 dB (weighted, IHF A), (with dbx)
Total harmonic distortion: 1 % (1 kHz, 0 VU, with dbx)
Adjacent channel separation: 55 dB (1 kHz, 0 VU, with dbx)
Clear: 70 dB (at 1 kHz)
BIAS fine control
Auto monitor
Multiple counter
Clock-controlled recording and playback
Peak level
Insertion of blank sections possible when recording
Power supply: PS-P2 power adapter (supplied)
Europe: primary 220 V (AC) Alternating current 50 Hz, 12 VA, secondary 12 V DC 500 mA
USA/Canada: 120 V alternating current 60 Hz, 11 VA
Great Britain/Australia: 240 V alternating current 50 Hz, 12 VA
General export model: 120/220 V alternating current 50/60 Hz, 12 VA
Europe: primary 220 V (AC) AC 50 Hz, 12 VA, secondary 12 V DC 500 mA
USA/Canada: 120 V AC 60 Hz, 11 VA
Great Britain/Australia: 240 V AC 50 Hz, 12 VA
General export model: 120/220 V AC 50/60 Hz, 12 VA
Power Adapter PS-P2
Carrying case CS-P5
Footswitch RC-30P
Microphone Input Plug Transformer 109B
Head Demagnetization Choke E-3
< li>Adapter RCA -> ¼ inch jack plug JC-T201
Cleaner for sound heads and rubber parts TEAC TZ-261
The 0 dBV value is based on 1 volt in the specifications. Voltage levels are also indicated in brackets (0.316 V at – 10 dBV is rounded down to 0.3 V). To calculate the reference level at 0 dB = 0.775 V (e.g. 0 dBm in a 600 ohm circuit), 2.2 dB must be added to the displayed dB value; e.g. - 10 dB Reference: 1 V = – 7.8 dB Reference: 0.775 V
(Fn. 1) These data were determined using TEAC test tape MTT-111DN.
(Fn. 2) These data were determined with TEAC test tape MTT-5561 (blank tape).
(Taken from the original BDA, logically supplemented)