Rotel RX-7707 specifications

Category : Receiver

Brand : Rotel

General

Note: In addition to devices with RCA jacks, those with DIN jacks were also available.

Connections

Technical data

Radio FM (FM)

Radio AM

Amplifier

Special equipment

  • Manufacturer: Rotel
  • back to Rotel Receiver
  • Model: RX-7707
  • Years of construction: 1976 - 1977
  • Made in: Japan
  • Color: silver and black
  • Power consumption: 270W
  • Dimensions (WxHxD): 570 x 120 x 330mm
  • Weight: 8.5kg
  • Factory price: unknown
  • Inputs:
    • Phono MM: 2.0mV 45k643961b8da111c0a15d770a1109a86d4
    • Tape/Aux: 130mV 50k643961b8da111c0a15d770a1109a86d4
    • Main in: 750mV 33k643961b8da111c0a15d770a1109a86d4
    • Antenna: FM 75+600 643961b8da111c0a15d770a1109a86d4, AM
  • Outputs:
    • Speaker: 2 pairs, separately switchable, 4 - 16 643961b8da111c0a15d770a1109a86d4
    • Main out: (750mV 10k643961b8da111c0a15d770a1109a86d4)
    • Tape out:
      • RCA: 300mV 3k643961b8da111c0a15d770a1109a86d4
      • DIN: 120mV 90k643961b8da111c0a15d770a1109a86d4
    • Headphones: N.A.
  • < /ul>
    • Phono MM: 2.0mV 45k643961b8da111c0a15d770a1109a86d4
    • Tape/Aux: 130mV 50k643961b8da111c0a15d770a1109a86d4
    • Main in: 750mV 33k643961b8da111c0a15d770a1109a86d4
    • Antenna: FM 75+ 600 643961b8da111c0a15d770a1109a86d4, AM
    • Speaker: 2 pairs, separately switchable, 4 - 16 643961b8da111c0a15d770a1109a86d4
    • Main out: (750mV 10k643961b8da111c0a15d770a1109a86d4)
    • Tape out:
      • RCA: 300mV 3k643961b8da111c0a15d770a1109a86d4
      • DIN: 120mV 90k643961b8da111c0a15d770a1109a86d4
    • Headphones: n.a.
    • RCA: 300mV 3k643961b8da111c0a15d770a1109a86d4
    • DIN: 120mV 90k643961b8da111c0a15d770a1109a86d4
    • Frequencies: 87.5 - 108 MHz
    • Input sensitivity IHF: 2.0µV
    • Sensitivity for min. 50dB: 3.6µV
    • Signal-to-noise ratio (SNR): >65dB
    • Total Harmonic distortion (THD) at 1kHz: 0.3% Mono, 0.5% stereo
    • Reception ratio: 1.5dB
    • Noise suppression: 70dB
    • Mirror frequency attenuation: 50dB
    • IF Attenuation: 70dB
    • AM attenuation: 62dB
    • Channel separation Stereo:
      • 100Hz: 35dB
      • 1kHz: 40dB
      • 10kHz: 35dB
    • Pilot attenuation: 50dB
    • SCA attenuation: 60dB< /li>
    • 100Hz: 35dB
    • 1kHz: 40dB
    • 10kHz: 35dB
    • Frequencies: 535 - 1605 kHz
    • Sensitivity: 200µV/m
    • Selectivity: 35dB
    • Mirror frequency attenuation: 60dB
    • IF attenuation: 40dB
    • integrated ferrite antenna
    • Continuous power 20Hz - 20kHz according to IHF-a:
      • 8 643961b8da111c0a15d770a1109a86d4: 35W <0.5% THD
      • 4 643961b8da111c0a15d770a1109a86d4: 70W<0.5% THD
      • < /ul>
      • Attenuation factor: 35 +/-10% at 8 ohms
      • Intermodulations: 0.1% at rated power -1dB
        • 60Hz : 7kHz = 4 : 1
      • Input voltage max. at 0.5% THD: Phono: 130mV
      • Frequency response: 5Hz - 65KHz +/-3.0dB at 1W
      • Phono equalization: 20Hz - 15kHz +/-1.0dB RIAA standard
      • Signal-to-noise ratio according to IHF-a:
        • Phono: >70dB
        • Tape/Aux : >85dB
      • Tone control:
        • Bass: +/- 10dB at 100Hz
        • Treble: +/- 10dB at 10kHz
      • Loudness: switchable
        • +8dB at 100Hz and +4dB at 10kHz
        • at Volume up to -40dB
      • 8 643961b8da111c0a15d770a1109a86d4: 35W<0.5% THD
      • 4 643961b8da111c0a15d770a1109a86d4: 70W <0.5% THD
      • 60Hz : 7kHz = 4 : 1
      • Phono: >70dB
      • Tape/Aux: >85dB
      • Bass: +/-10dB at 100Hz
      • Treble: +/- 10dB at 10kHz
      • +8dB at 100Hz and +4dB at 10kHz
      • with volume up to -40dB
      • Transmitter memory for 5 stations mechanically (preostats)
        • can be activated via "sensor" buttons
      • separate pre/power amplifier
      • can be activated via"sensor" buttons
    • ul>
    • User Manual Rotel RX-7707
    • Homepage Rotel

    Rotel RX-7707


    Comment:



    Comment box:


    Rotel RX-7707 relate