Myro Amur C specifications

Category : Speakers

Model with pentagonal housing to avoid standing waves inside. Since this geometry is acoustically very advantageous compared to right angles, it was also used earlier in the Myro Concert Monitor. The chassis are from the Accuton Cell series; the tweeter is made of Ceramic, hence the designation "C". Surface Finishes: Natural Bamboo, Caramel Bamboo, Black Bamboo. Varnishes in high gloss or semi-gloss in the desired color. Chassis color: white or gray

Concept

Factory price: 18800 Euro

Assembly Tweeter: Accuton Cell C25-6-158

Lower cutoff frequencies: f (-0 dB) = 47 Hz f (-3 dB) = 35 Hz f (-6 dB) = 28 Hz

Throughout the 75 components are used for crossovers. Each loudspeaker is calibrated and thus receives its component values optimally tailored to it. The time required is considerable. All in all, a "time-coherent sound transducer" is created. Special efforts are made to keep the interventions in the signal as precise and as low as possible. For example, the sum of all four coils in front of the midrange is less than 0.18 mH with a total resistance of 0.17 ohms. The values used are custom-made and are all smaller than the smallest value available as standard in the Mundorf product range of film coils. The midrange driver circuit consists of twelve individual sections.

The case is ingeniously simple. The bevels at the edges, together with the 108 degree internal angle of the sides, result in almost the same properties as a very large rounding radius. Previous experiments have shown that a radius of 10 cm gives excellent results. )there are no parallel side faces. In addition, very effective foams are used for reflection insulation. An additional insulation measure counteracts standing waves in the inner height. The housing walls consist of a sandwich construction with a wall thickness of 32 mm plus a paint thickness of about 1 mm.

Myro Amur C (High Gloss White)

Caramel

Perfection: the jump response

Product description

<back: Myro Amur Series> <back: Myro speaker> <back: Myro >