Technics SL-L 3 specifications

Category : Record player

Brand : Technics

General

Connections

Tech nical data

.

arm

pickup

special features

  • manufacturer: Tech nics
  • model: SL-L 3
  • type: Tangent ial record player
  • year of construction: 1985 - 1990
  • Made in Japan
  • colour: Anthracite/Black, silver
  • power consumption: 14 W
  • dimensions: 430 x 90 x 350 mm (WxHxD) (Maximum height when it is fully open upper part of the housing) 390mm
  • weight: 5.2 kg
  • factory price approx.: 798 DM
  • outputs: 2 x RCA red/white + GND
  • drive: direct drive, quartz-control QPL
  • Motor: quartz-controlled, phase rigid DC motor
  • speed: 33 1/3, 45 U/min (manual selection is possible)
  • flutter: 0,012% WRMS (JIS 5521), ± 0,035% (IEC 98A)
    • Measured on the basis of signals from the built-in frequency generator of motor part
  • rumple-to-noise ratio:
    • IEC 98A unweighted: a rating of -56 dB
    • IEC 98A: -78 dB
  • turntable: aluminum die casting, Ø 300 mm
  • mode of operation: fully automatic Programmable
  • tonearm: Linear Tracking tangential tonearm
    • drive: DC Motor
    • TP4-System
    • effective tonearm mass: 6 g
    • effective arm length: 150 mm
    • sampling error angle: ± 0,1°
  • Measured on the basis of signals from the built-in frequency generator of motor part
  • IEC 98A unweighted: -56 dB
  • IEC 98A rating: -78 dB
  • drive: DC Motor
  • TP4-System
  • effective tonearm mass: 6 g
  • effective arm length: 150 mm
  • sampling error angle: ± 0,1°
  • type: Linear Tracking tangential tonearm with cardan's suspension with 4-point-pivot bearing
  • drive: DC Motor / TP4-System
  • Effective tonearm mass: 9g (including pickup)
  • Effective arm length: 105 mm
  • sampling error angle: ± 0,1°
  • resonance frequency: 12 Hz
  • model: EPC-P33 - MM-System
  • type: Moving Magnet Stereo cartridge
    • magnetic circuit: full slats core
  • frequency response: 10 Hz – 50 kHz, 20 Hz to 10 kHz, ± 1 dB
  • output voltage: 2.5 mV at 1kHz 5cm/sec. Zero-to peak, lateral [7mV at 1kHz 10cm/sec, zero-to peak, 45° (DIN 45 500)]
  • Channel separation: 22 dB at 1kHz
  • Channel balance: within 1.8dB at 1kHz
  • Connection impedance: 47kΩ ~ 100kΩ
  • Compliance: 12 x 10ˉ6 cm/dyn at 100 Hz
  • Pickup mass: 6 g (pickup only)
  • Contact force: 1.25g ± 0.25g (12.5N ± 2.5N) (not adjustable)
  • Replacement needle: EPS-33ES (elliptical)
  • Magnetic circuit: full-disk core
  • Features:
    • Auto-start
    • Auto-feed
    • Auto-return
    • Auto-stop
    • Repeated-play
    • Program-play
    • Direct music selection
    • Forward and backward jump play
    • Forward and backward search play
    • Automatic plate size selection
    • Record detection
  • Programmable, very safe operation by fully automatic - only possible with the hood closed
  • Very safe operation by fully automatic - only possible with the hood closed
  • Record size and track starts are detected by the device
  • Skip, repeat and cueing function.
  • Auto-start
  • Auto-feed
  • Auto-return
  • Auto-stop
  • Repeated-Play
  • Program-play
  • Direct music selection
  • Forward and backward jump play
  • Forward and backward search play
  • Automatic Plate size selection
  • Record detection
  • Other models of the same series:
  • Tech nics SL-L 1
  • Tech nics SL-L 3
  • Picture: Tech nics SL-L3
  • Excerpt from brochure: Tech nics SL-L 3

Technics SL-L 3

Technics SL-L 3


Comment:



Comment box:


Technics SL-L 3 relate