Technics SL-QD3 specifications

Category : Record player

Brand : Technics

General

Connections

Tech nical data

[7 mV at 1 kHz 10 cm/s. Zero to peak, 45° (DIN 45 500)]

Special equipment

This nominal power refers to the drive part only, exclusively influences of vinyl record, pickup or tonearm, but including turntables. Measured on the basis of signals from the built-in frequency generator of the motor part.

  • Manufacturer: Tech nics
  • Model: SL-QD3
  • Years of manufacture:
  • Manufactured in:
  • Color:
  • Power consumption: 6W
  • Dimensions: 43 x 37 x 41 cm (max. Height when the top part/cover hood is open);
  • Weight: 4.6 kg;
  • Factory price approx.:
    Outputs:
  • Inputs:
  • Drive: Direct drive with quartz control QPL;
  • Motor: DC motor without collector;
  • Speed : 33-1/3 and 45 rpm.
  • Synchronism fluctuations: 0.012% WRMS *, 0.025% WRMS (JIS C5521) ±0.035% peak
  • Rumble noise distance: -56dB (IEC 98A unrated), -78dB (IEC 98A rated)
  • Turntable: Aluminum injection molding, diameter 31.2cm;
  • a956e985535b8d57732d14dfa0e4c71ating mode: Automatic start, Automatic return, Repeat, Manual operation.
  • Pitch:
  • Tonearm: Statically balanced, straight tonearm,
    • Adjustment range: 1.25±0.25g
    • Effective length: 230mm
    • Overhang: 15mm
    • Track error angle: 2°32` at the inlet groove of a 30cm plate
    • Effective mass: 13.5g (including Pickup);
    • Pickup weight: permissible 6g.
  • Pickup: pickup system of the plug–in type.
    • Type: Movable Magnetic Stereo Pickup
      • Magnetic Circuit: Full disk core;
      • Frequency response: 10 Hz to 40 kHz
      • Output voltage: 2.5mV at 1 kHz 5cm/s. Zero to peak, lateral
  • Adjustment range: 1.25 ±0.25g
  • Effective length: 230mm
  • Overhang: 15mm
  • Track error angle: 2°32` at the inlet groove of a 30cm plate
  • Effective mass: 13.5g (including pickup);
  • Pickup weight: permissible 6g.
  • Type: Movable magnet stereo -Pickup
    • Magnetic circuit: full-disk core;
    • Frequency response: 10 Hz to 40 kHz
    • Output voltage: 2.5mV at 1 kHz 5cm/s. Zero to peak, lateral
  • Magnetic circuit: full-disk core;
  • Frequency response: 10 Hz to 40 kHz
  • Output voltage: 2.5mV at 1kHz 5cm/s. Zero to peak, lateral
    • Channel separation: More than 22 dB at 1kHz
    • Channel deviation: Within 1.8dB at 1kHz
    • Recommended end impedance: 47kΩ~100kΩ
    • >Nominal yield(dynamic): 12X10⁶cm/dyn at 100Hz
    • Needle Pressure Range: 1.25±0.25g (12.5±2.5mN
    • Weight: 6 g ( pickup only)
    • Replacement Needle: EPS-30ES.
  • Channel separation: More than 22 dB at 1kHz
  • Channel deviation: Within 1.8dB at 1kHz
  • Recommended Final impedance: 47kΩ~100kΩ
  • Nominal yield(dynamic): 12X10⁶cm/ dyn at 100Hz
  • Needle Pressure Range: 1.25±0.25g (12.5±2.5mN
  • Weight: 6 g (pickup only)
  • Replacement Needle: EPS-30ES.
  • Channel separation: More than 22 dB at 1kHz
  • Channel deviation: Within 1.8dB at 1kHz
  • Recommended final impedance: 47kΩ~100kΩ
  • Nominal yield(dynamic): 12X10⁶cm/dyn at 100Hz
  • Needle Pressure Range: 1.25±0.25g (12.5±2.5mN
  • Weight: 6 g ( Pickup only)
  • Replacement Needle: EPS-30ES.
  • here, if available
  • Other models of the same series:


Comment:



Comment box:


Technics SL-QD3 relate