Rotel RMX-70 specifications

Category : Receiver

Brand : Rotel

General

connectors

Technical data

FM Radio (FM)

Radio

amplifier

special features

Other models in this series:

inputs: sensitivity and impedance
- Phono MM: 2.5 mV 47 k643961b8da111c0a15d770a1109a86d4
- Tape: 150mV 37 k643961b8da111c0a15d770a1109a86d4
- antenna: FM 300 + 75 643961b8da111c0a15d770a1109a86d4s, ON
outputs: sensitivity and impedance
- Tape out: n. a.
- headset: 4 - 16 643961b8da111c0a15d770a1109a86d4s
- speakers: 1 Pair, 4 - 16 643961b8da111c0a15d770a1109a86d4s

frequency: 87.5 - 108 MHz
input sensitivity:
- Mono: 11,2 dBf / 2,0 µV
- Stereo: n. a.
DIN sensitivity 26db SNR of 75 643961b8da111c0a15d770a1109a86d4s: n. a.
minimum sensitivity 50dB SNR:
- Mono: 17,8 dBf 4.3 µV
- Stereo: 41,0 dBf in 63µV
signal-to-noise ratio (SNR) at 65dBf: Mono: 72dB / Stereo: 65dB
total harmonic distortion (THD) at 65dBf: (Mono/Stereo)
- 100 Hz: 0,3% / 0,5%
- 1kHz: 0,3% / 0,5%
- 6kHz is 0.35% / 0.6% in
frequency response: 30Hz - 15kHz, with -1.0/+0.5 dB
reception ratio: 1.0 dB
in addition to channel rejection: 45dB at +/-400kHz
interference suppression: 70dB
mirror frequency attenuation: 60dB
ZF-attenuation: 75dB
ON-loss: 56dB
channel separation in Stereo:
- 100Hz: 35dB
- 1kHz: 45dB
- 10kHz: 35dB
pilot tone damping: 45dB
SCA rejection: 70dB

the duration of the performance, IHF-a THD <0,5% 20Hz - 20kHz:
- 8 643961b8da111c0a15d770a1109a86d4: 20W
- 4 643961b8da111c0a15d770a1109a86d4: 40W
total harmonic distortion IHF-a: <0,08%
- 20Hz - 20kHz at rated power
inter-modulations: <0,08%
- 60Hz : 7kHz = 4 : 1 at rated power
damping factor: 45 at 1kHz into 8 643961b8da111c0a15d770a1109a86d4s
max. Input Voltage:
- Phono: 130mV
- Tape: 5V
Frequency Response:
- Phono: 30Hz - 15kHz, +/-0.3dB, RIAA Standard
- Tape: 10Hz - 70kHz, -1.0/+0.0dB
Signal-to-noise ratio: according to IHF-a
- Phono: 82dB
- Tape: 90dB
Tone control:
- Bass: +/- 10dB at 50Hz
- Treble: +/- 10dB at 15kHz