Rotel RX-1010 specifications
Category : Receiver
Brand : Rotel
General
connectors
Technical data
amplifier
FM Radio
Radio
Other models in this series:
- manufacturer: Rotel
- back to Rotel Receiver
- model: RX-1010
- year of construction: 1981 - 1982
- Made in Japan
- color: black
- power consumption: 360 watts
- dimensions (WxHxD): 430 x 120 x 360mm
- weight: 9.0 kg
- original price: unknown
- number of inputs:
- antenna: AM, FM 300, and 75 643961b8da111c0a15d770a1109a86d4s
- Phono MM: 2.5 mV 50 k643961b8da111c0a15d770a1109a86d4
- Tape/Aux: 150mV at 30 k643961b8da111c0a15d770a1109a86d4
- number of outputs:
- headset: 4 - 16 643961b8da111c0a15d770a1109a86d4s
- Tape 1 out: 300mV at 550 643961b8da111c0a15d770a1109a86d4 (RCA)
- Tape 2 out: 150mV at 80k 643961b8da111c0a15d770a1109a86d4 (DIN)
- speakers: 2 pairs of 4 - 16 643961b8da111c0a15d770a1109a86d4s
- can be separately switched
- antenna: AM, FM 300, and 75 643961b8da111c0a15d770a1109a86d4s
- Phono MM: 2.5 mV 50 k643961b8da111c0a15d770a1109a86d4
- Tape/Aux: 150mV to 30 k643961b8da111c0a15d770a1109a86d4
- headset: 4 - 16 643961b8da111c0a15d770a1109a86d4s
- Tape 1 out: 300mV at 550 643961b8da111c0a15d770a1109a86d4 (RCA)
- Tape 2 out: 150mV at 80k 643961b8da111c0a15d770a1109a86d4 (DIN)
- speakers: 2 pairs of 4 - 16 643961b8da111c0a15d770a1109a86d4s
- can be separately switched
- can be separately switched
- rated power 20Hz - 20kHz, according IHF-a:
- 8 643961b8da111c0a15d770a1109a86d4s: 60W at <0.03% THD
- 4 643961b8da111c0a15d770a1109a86d4s: 120W at <0,03% THD
- continuous output a 1kHz sine in accordance with DIN:
- 8 643961b8da111c0a15d770a1109a86d4: 50W 1% THD
- 4 643961b8da111c0a15d770a1109a86d4: 100W at 1% THD
- total harmonic distortion IHF-a: <0,03%
- damping factor Total: 50 at 1kHz into 8 643961b8da111c0a15d770a1109a86d4s
- inter-modulation (TIM): <0,03%
- frequency response IHF-a:
- Phono MM: 50Hz - 15kHz +/ - 0.5 dB RIAA-Standard
- Tape/Aux: 5Hz - 60kHz -1/+0 dB
- Signal-to-noise ratio according IHF-a:
- Phono: 75dB
- Tape/Aux: 95dB
- clipping boundaries inputs:
- Phono: 180mV
- Tape/Aux. 5V
- Tone control:
- Bass: +/- 10dB at 100Hz
- Treble: +/- 10dB at 10kHz
- Loudness: switchable
- +10dB at 100Hz and +5dB at 10kHz
- Low Filter (Subsonic): switchable
- Mono/Stereo: switchable
- 8 643961b8da111c0a15d770a1109a86d4: 60W at <0.03% THD
- 4 643961b8da111c0a15d770a1109a86d4: 120W at <0.03% THD
- 8 643961b8da111c0a15d770a1109a86d4: 50W at 1% THD
- 4 643961b8da111c0a15d770a1109a86d4: 100W at 1% THD
- Phono MM: 50Hz - 15kHz +/-0.5dB RIAA standard
- Tape/Aux: 5Hz - 60kHz -1/+0dB
Phono: 75dB - Tape/Aux: 95dB
- Phono: 180mV
- Tape/Aux. 5V
- Bass: +/- 10dB at 100Hz
- height: +/- 10dB at 10kHz
- +10dB at 100Hz and +5dB at 10kHz
- frequencies: 88 - 108 MHz
- input sensitivity 300-643961b8da111c0a15d770a1109a86d4:
- minimum sensitivity 50dB to 300 643961b8da111c0a15d770a1109a86d4:
- Mono: 16,0 dBf / a 3.5 µV
- frequency response: 30Hz - 15kHz -1/+0.3 dB
- signal-to-noise ratio at 65dBf:
- total harmonic distortion at 65dBf: (Mono/Stereo)
- 100Hz: 0,1% / 0,3%
- 1kHz: 0,15% / 0,3%
- 6kHz: 0,25% / 0,4%
- frequency response: 20Hz - 15kHz -3/+1dB
- selectivity: 1.0 dB
- Stereo channel separation:
- 100Hz: 40dB
- 1kHz: 45dB
- 10 kHz: 40 dB
- muting threshold: 20µV
- frequency selection: 90dB
- in addition to the wave selection: 70dB
- carrier frequency rejection: 110dB
- mirror frequency attenuation: 80dB
- if rejection: 50dB
- ON-rejection: 65dB
- SCA rejection: 65dB
- station memory: 7
- Mono: 16,0 dBf / a 3.5 µV
- 100Hz: 0,1% / 0,3%
- 1kHz: 0,15% / 0,3%
- 6kHz: 0,25% / 0,4%
- 100Hz: 40dB
- 1kHz: 45dB
- 10 kHz: 40 dB
- frequencies: 535 - 1605 kHz
- selectivity: 300µV/m
- sensitivity: 40dB
- Signal-to-noise ratio: 50dB
- in addition to the wave selection: 50dB
- carrier frequency reduction: 35dB
- station memory: 7
- cassette recorder: RD-1010
- Spectrum-Analyzer: RY-1010
Comment:
Comment box:
Rotel RX-1010 relate