Rotel RX-203 specifications

Category : Receiver

Brand : Rotel

General

connectors

Technical data

amplifier

FM Radio

Radio

special features

operating manual for Rotel RX-203 Homepage Rotel

Aux: 150mV 35k643961b8da111c0a15d770a1109a86d4
Phono:
- Likes: 2.5 mV 45k643961b8da111c0a15d770a1109a86d4 200pF
- CE: 120mV 240k643961b8da111c0a15d770a1109a86d4
Tape In:
- RCA: 150mV at 35 ohms
- DIN: 150mV 35k643961b8da111c0a15d770a1109a86d4
antenna: AM, FM 300, and 75 643961b8da111c0a15d770a1109a86d4s

headphones to Front: 4 - 600 643961b8da111c0a15d770a1109a86d4s
Tape out:
- RCA: 300mV 250 643961b8da111c0a15d770a1109a86d4s
- DIN: 100mV 90k643961b8da111c0a15d770a1109a86d4
speakers: 1 Pair of 4 - 16 643961b8da111c0a15d770a1109a86d4s

rated power 20Hz - 20kHz, according IHF-a:
- 8 643961b8da111c0a15d770a1109a86d4: 24W at <0.5% THD
- 4 643961b8da111c0a15d770a1109a86d4s: 20W at <0.5% THD
total harmonic distortion IHF-a: <0,5%
damping factor: 35 at 20Hz - 20kHz, 8 643961b8da111c0a15d770a1109a86d4s
inter-modulation (TIM): <0,5%
- 60Hz : 7kHz = 4 : 1
frequency response IHF-a:
- Phono: 20Hz - 15kHz +/-0.3 dB RIAA-Standard
- Aux + Tape: 5Hz - 70kHz -1/+0 dB
clipping boundaries:
- Phono Mag: 120mV
- all other: <5.0 V
Signal-to-noise ratio according IHF-a:
- Phono: 75dB
- Tape out: 85dB
sound-control:
- Deep: +/- 10dB at 100Hz
- height: +/- 10dB at 10kHz
Loudness: switchable
- +7dB at 100Hz and +4 dB at 10kHz

frequency: 88 - 108 MHz
input sensitivity:
- Mono: 11,2 dBf 2,0 µV
- Stereo: 20.0 dB to 5.5 µV
minimum sensitivity 50dB:
- Mono: 16,0 dBf to 3.5 µV
- Stereo: 39,0 dBf 48µV
sensitivity according to DIN: 1,3 µV for 26dB SNR at 75643961b8da111c0a15d770a1109a86d4
frequency response: 30Hz - 15kHz -2/+0.2 dB
signal-to-noise ratio at 65dBf:
- Mono: 75dB
- Stereo: 65dB
total harmonic distortion at 65dBf: (Mono/Stereo)
- 100Hz: 0,2%/0,3%
- 1kHz: 0,2%/0,3%
- 6kHz: 0,3%/A 0.4%
Stereo channel separation:
- 1kHz: 40dB
- 30Hz - 15kHz: 30dB
selectivity: 2dB
muting threshold: - 20dB
frequency selection: 50dB
in addition to the wave selection: 75dB at +/-400kHz
carrier frequency suppression: 50dB
mirror frequency attenuation: 75dB
if rejection: 50dB
ON-suppression: 60dB