Rotel RB-880 specifications
Category : Power amplifiers
Brand : Rotel
General
Connections
Tech nical data
Special features
While the Mark I was sold worldwide, the Mark II and III models were only released in Japan. The requirements:
Other models in this series:
Rotel 880 in the Old-Fidelity -Forum
Rotel Homepage user manual Rotel RB-880
- manufacturer: Rotel
- back to the Rotel power amplifiers
- model: RB-880
- year of construction:
- (MkI): 1987
- MkII: 1989
- MkIII: 1991
- Made in Japan
- color: black
- type: Class A/B Stereo amplifier with a regulated power supply
- power consumption: 900 watts
- dimensions (WxHxD): 430 x 115 x 425 mm
- weight: 19.5 kg
- price: 1000$
- (MkI): 1987
- MkII: 1989
- MkIII: In 1991
- inputs:
- outputs:
- 1 pair of speakers 2 - 8 Ohm s
- 1 pair of speakers, 2 - 8 Ohm s
- input sensitivity: 1 Vrms at 25 kOhm for rated power
- continuous output power according IHF, a-weighted
- 8 Ohm : 2 x 100 watts
- 4 Ohm : 2 x 200 watts
- dynamic power according to DIN with 1 kHz sine-wave
- 8 Ohm : 2 x 145 watts
- 4 Ohm : 2 x 275 watts
- 2 Ohm 2 x 470 watts
- total harmonic distortion: =<0,03% at rated power
- damping factor: 100 at 20Hz to 20kHz, 8 Ohm s
- frequency response: 4 - 100,000 Hz (+0,5/-3 dB)
- signal-to-noise ratio: 120 dB (IHF, A-network)
- inter-modulations: =<0,03% at rated power
- according IHF-A, 60Hz:7kHz 4:1
- 8 Ohm : 2 x 100 watts
- 4 Ohm : 2 x 200 watts
- 8 Ohm : 2 x 145 watts
- 4 Ohm : 2 x 275 watts
- 2 Ohm 2 x 470 watts
- according IHF-A, 60Hz:7kHz 4:1
- brückbar in Mono mode
- regulated power supply, very rarely in the case of power amplifiers
- MK-models with a copper-plated Chassis and Furutech cable and LS-Jacks
- Mark I encountered;: <1.000
- Mark II : 400
- Mark III: 100
Comment:
Comment box:
Rotel RB-880 relate