Luxman L-550AX specifications

Category : Integrated amplifier

Brand : Luxman

General

connectors

Technical data

special features

  • manufacturer: Luxman
  • model: L-550 AX
  • type: Class-A amplifier
  • year of construction: 2012 - 2016
  • Made in Japan
  • color: Front silver, gray housing
  • remote control: Yes, RA-17
  • power consumption:
  • dimensions: 440 x 178 x 454 mm (WxHxD)
  • weight: 24,3 kg
  • factory price approx.: 5'290 euros
  • number of inputs:
    • Phono MM: 2.5 mV, 47 kOhm
    • Phono MC: 0.3 mV, 100 Ohm s
    • Line 1, 2, 3, 4: 180 mV, 42 kOhm
    • Balanced XLR : 180 mV, 55 kOhm
    • Tape Play: 180 mV, 42 kOhm
    • Main: 550 mV / 47 K-ohms
  • number of outputs:
    • Tape Rec: 180 mV
    • Pre Out: 1 V
    • headset:
    • 2 pairs of Speakers
  • Phono MM: 2.5 mV, 47 kOhm
  • Phono MC: 0.3 mV, 100 Ohm s
  • Line 1, 2, 3, 4: 180 mV, 42 kOhm
  • Balanced XLR : 180 mV, 55 kOhm
  • Tape Play: 180 mV, 42 kOhm
  • Main: 550 mV / 47 K-ohms
  • Tape Rec: 180 mV
  • Pre Out: 1 V
  • headset:
  • 2 pairs of Speakers
  • the duration of the performance Class-A:
    • 8 Ohm : 2 x 20 W (RMS , 20 Hz - 20 kHz)
    • 4 Ohm : 2 x 40 W
  • dynamic performance, Class-A:
    • 8 Ohm s:
    • 4 Ohm :
  • total harmonic distortion: < 0.007 %
  • damping factor:
  • frequency response:
    • Phono MC 20 Hz - 20,000 Hz
    • Phono MM: 20 Hz - 20,000 Hz
    • high level: 20 Hz - 100,000 Hz
  • signal-to-noise ratio:
    • Phono MC: > 75 dB
    • Phono MM: > 91 dB
    • high level: > 105 dB
  • stereo channel separation:
  • sound-control:
    • Bass: ± 8 dB at 100 Hz
    • height: ± 8 dB at 100 Hz
  • Loudness: + 7 dB at 100 Hz + 5 dB at 10 kHz
  • Low Filter (Subsonic): Yes
  • Mute: Yes
  • 8 Ohm : 2 x 20 W (RMS , 20 Hz - 20 kHz)
  • 4 Ohm : 2 x 40 W
  • 8 Ohm s:
  • 4 Ohm :
  • Phono MC 20 Hz - 20,000 Hz
  • Phono MM: 20 Hz - 20,000 Hz
  • high level: 20 Hz - 100,000 Hz
  • Phono MC: > 75 dB
  • Phono MM: > 91 dB
  • high level: > 105 dB
  • Bass: ± 8 dB at 100 Hz
  • height: ± 8 dB at 100 Hz
  • 2 VU-meters
  • Pure Class-A operation
  • Pre - and power amp section features
    • This Bi-Amping possible or involvement in an AV System
  • the Rec Out selector
  • Backlit display for:
    • Monitor indicator: Lights up when the monitor switch is in the On Position
    • power display: The instrument to show the level in decibels and are illuminated when the amplifier is turned on
    • Subsonic indicator: Lights when the Subsonic filter switch is turned on
    • Mono indicator: Lights when the mono switch is activated
      • notes: Subsonic, Mono and Loudness can be achieved only with the help of the supplied remote control (RA-17A) is connected.
    • Standby indicator: Lights up when the mains plug is connected to a wall socket and the power switch is in the off position
    • Loudness Indicator: Lights up when the loudness switch is activated
    • Line Direct Indicator: Lights up when the Line Straight switch is activated
    • Seperately Indicator: Lights up when the switch for disconnecting the preamp and power amplifier is activated
    • RCA terminal with 18 mm center distance
      • The introduction of RCA input and output terminals with 18 mm center distance allows the use of even high-quality connection cables with large plugs
    • Line-phase Sensor
    • Gold-plated input and output sockets
    • This makes bi-amping possible or integration into a AV System
    • Monitor Indicator: Lights up when the monitor switch is in the On position
    • Power Indicator: The instruments show the level in decibels and are illuminated when the amplifier is turned on
    • Subsonic Indicator: Lights up when the subsonic switch is turned on
    • Mono Indicator: Lights up when the mono switch is turned on
      • Notes: Subsonic, Mono and loudness can only be switched with the help of the supplied remote control (RA-17A).
    • Standby indicator: Lights up when the mains plug is connected to a wall socket and the power switch is in the off position
    • Loudness Indicator: Lights up when the loudness switch is activated
    • Line Direct Indicator: Lights up when the Line Straight switch is activated
    • Seperately Indicator: Lights up when the switch for disconnecting the preamp and power amplifier is activated
      • Notes: Subsonic, mono and loudness can only be switched with the help of the supplied remote control (RA-17A).
      • The introduction of RCA input and output terminals with 18 mm center spacing allows the use of even high-quality connection cables with large connectors
      • Extract from Prospectus: L-550 AX Front
      • Extract from Prospectus: L-550 AX Back side
      • External link: Website "Luxman Germany": [1]
      • External link: Website "Luxman Worldwide": [2]

      Luxman L-550AX

      Luxman L-550AX


      Comment:



      Comment box:


      Luxman L-550AX relate