Luxman L-550AXII specifications

Category : Integrated amplifier

Brand : Luxman

General

connectors

Technical data

special features

manufacturer: Luxman
model: L-550 AX II
type: Class-A amplifier
year of construction: 2017 -
Made in Japan
color: Front silver, gray housing
remote control: Yes, RA-17
power consumption:
dimensions: 440 x 178 x 454 mm (WxHxD)
weight: 24,3 kg
factory price approx.: 5'990 euros

number of inputs:
- Phono MM: 2.5 mV, 47 kOhm
- Phono MC: 0.3 mV, 100 Ohm s
- Line 1, 2, 3, 4: 180 mV, 42 kOhm
- Balanced XLR : 180 mV, 55 kOhm
- Tape Play: 180 mV, 42 kOhm
- Main: 550 mV / 47 K-ohms
number of outputs:
- Tape Rec: 180 mV
- Pre Out: 1 V
- headset:
- 2 pairs of Speakers

Phono MM: 2.5 mV, 47 kOhm
Phono MC: 0.3 mV, 100 Ohm s
Line 1, 2, 3, 4: 180 mV, 42 kOhm
Balanced XLR : 180 mV, 55 kOhm
Tape Play: 180 mV, 42 kOhm
Main: 550 mV / 47 K-ohms

Tape Rec: 180 mV
Pre Out: 1 V
headset:
2 pairs of Speakers

the duration of the performance Class-A:
- 8 Ohm : 2 x 20 W (RMS , 20 Hz - 20 kHz)
- 4 Ohm : 2 x 40 W
dynamic performance, Class-A:
- 8 Ohm s:
- 4 Ohm :
total harmonic distortion: < 0.007 %
damping factor:
frequency response:
- Phono MC 20 Hz - 20,000 Hz
- Phono MM: 20 Hz - 20,000 Hz
- high level: 20 Hz - 100,000 Hz
signal-to-noise ratio:
- Phono MC: > 75 dB
- Phono MM: > 91 dB
- high level: > 105 dB
stereo channel separation:
sound-control:
- Bass: ± 8 dB at 100 Hz
- height: ± 8 dB at 100 Hz
Loudness: + 7 dB at 100 Hz + 5 dB at 10 kHz
Low Filter (Subsonic): Yes
Mute: Yes

8 Ohm : 2 x 20 W (RMS , 20 Hz - 20 kHz)
4 Ohm : 2 x 40 W

8 Ohm s:
4 Ohm :

Phono MC 20 Hz - 20,000 Hz
Phono MM: 20 Hz - 20,000 Hz
high level: 20 Hz - 100,000 Hz

Phono MC: > 75 dB
Phono MM: > 91 dB
high level: > 105 dB

Bass: ± 8 dB at 100 Hz
height: ± 8 dB at 100 Hz

2 VU-meters
Pure Class-A operation
Pre - and power amp section features
- This Bi-Amping possible or involvement in an AV System
the Rec Out selector
Backlit display for:
- Monitor indicator: Lights up when the monitor switch is in the On Position
- power display: The instrument to show the level in decibels and are illuminated when the amplifier is turned on
- Subsonic indicator: Lights when the Subsonic filter switch is turned on
- Mono indicator: Lights when the mono switch is activated
  - notes: Subsonic, Mono and Loudness can be achieved only with the help of the supplied remote control (RA-17A) is connected.
- Standby indicator: Lights up when the mains plug is connected to a wall socket and the power switch is in the off position
- Loudness Indicator: Lights up when the loudness switch is activated
- Line Direct Indicator: Lights up when the Line Straight switch is activated
- Seperately Indicator: Lights up when the switch for disconnecting the preamp and power amplifier is activated
- RCA terminal with 18 mm center distance
  - The introduction of RCA input and output terminals with 18 mm center distance allows the use of even high-quality connection cables with large plugs
- Line-phase Sensor
- Gold-plated input and output sockets
- This makes bi-amping possible or integration into a AV System
- Monitor Indicator: Lights up when the monitor switch is in the On position
- Power Indicator: The instruments show the level in decibels and are illuminated when the amplifier is turned on
- Subsonic Indicator: Lights up when the subsonic switch is turned on
- Mono Indicator: Lights up when the mono switch is turned on
  - Notes: Subsonic, Mono and loudness can only be switched with the help of the supplied remote control (RA-17A).
- Standby indicator: Lights up when the mains plug is connected to a wall socket and the power switch is in the off position
- Loudness Indicator: Lights up when the loudness switch is activated
- Line Direct Indicator: Lights up when the Line Straight switch is activated
- Seperately Indicator: Lights up when the switch for disconnecting the preamp and power amplifier is activated

Luxman L-550AXII specifications

Comment:

Comment box:

Luxman L-550AXII relate