Luxman L-590AX specifications

Category : Integrated amplifier

Brand : Luxman

General

connectors

Technical data

special features

  • manufacturer: Luxman
  • model: L-590 AX
  • type: Class-A amplifier
  • year of construction: 2012 - 2015
  • Made in Japan
  • color: Front-silver, Housing grey
  • remote control: Yes
  • power consumption: 350 W max., 1 W Stand-By
  • dimensions: 440 x 193 x 463 mm (WxHxD)
  • weight: 28.4 kg
  • factory price approx.: 8'200 Euro
  • number of inputs:
    • Phono MM: 2.5 mV, 47 kOhm
    • Phono MC: 0.3 mV, 100 Ohm s
    • Line 1, 2, 3, 4: 180 mV, 42 kOhm
    • Balanced XLR 1, 2: 180 mV, 55 kOhm
    • Tape Play: 180 mV, 42 kOhm
    • Main: 550 mV / 47 K-ohms
  • number of outputs:
    • Tape Rec: 180 mV
    • Pre Out: 1 V
    • headset:
    • 2 pairs of Speakers
  • Phono MM: 2.5 mV, 47 kOhm
  • Phono MC: 0.3 mV, 100 Ohm s
  • Line 1, 2, 3, 4: 180 mV, 42 kOhm
  • Balanced XLR 1, 2: 180 mV, 55 kOhm
  • Tape Play: 180 mV, 42 kOhm
  • Main: 550 mV / 47 K-ohms
  • Tape Rec: 180 mV
  • Pre Out: 1 V
  • headphone:
  • 2 pairs of Speakers
  • the duration of the performance Class-A:
    • 8 Ohm : 2 x 30 W (RMS , 20 Hz - 20 kHz)
    • 4 Ohm : 2 x 60 W
  • dynamic performance, Class-A:
    • 8 Ohm :
    • 4 Ohm :
  • total harmonic distortion: < 0.005 %
  • damping factor: - 240 at 8 Ohm s
  • frequency response:
    • Phono MC 20 Hz - 20,000 Hz, ± 0.5 dB, Line Straight
    • Phono MM: 20 Hz - 20,000 Hz switched on, ± 0.5 dB, Line Straight
    • switched to high level: 20 Hz - 100.000 Hz at -3 dB, Line Straight
  • signal-to-noise ratio:
    • Phono MC: > 75 dB
    • Phono MM: > 91 dB
    • high level: > turned on; 105 dB
  • stereo channel separation:
  • control:
    • Bass: ± 8 dB at 100 Hz
    • treble: ± 8 dB at 100 Hz
  • Loudness: + 7 dB at 100 Hz + 5 dB at 10 kHz
  • Low Filter (Subsonic) sound: Yes
  • Mute: Yes
  • 8 Ohm : 2 x 30 W (RMS , 20 Hz - 20 kHz)
  • 4 Ohm : 2 x 60 W
  • 8 Ohm s:
  • 4 Ohm :
  • Phono MC: 20 Hz - 20,000 Hz, ± 0.5 dB, Line, Straight on
  • Phono MM: 20 Hz - 20,000 Hz, ± 0.5 dB, Line Straight
  • switched to high level: 20 Hz - 100.000 Hz at -3 dB, Line Straight
  • Phono MC: > 75 dB
  • Phono MM: > turned on; 91 dB
  • high level: > 105 dB
  • Bass: ± 8 dB at 100 Hz
  • height: ± 8 dB at 100 Hz
  • 2 VU-meters
  • Pure Class-A operation
  • Pre - and power amp section features
    • This Bi-Amping possible or involvement in an AV System
  • the Rec Out selector
  • Backlit display for:
    • Monitor indicator: Lights up when the monitor switch is in the On Position
    • power display: The instrument to show the level in decibels and are illuminated when the amplifier is turned on
    • Subsonic indicator: Lights when the Subsonic filter switch is turned on
    • Mono indicator: Lights when the mono switch is activated
      • notes: Subsonic, Mono and Loudness can be achieved only with the help of the supplied remote control (RA-17A) is connected.
    • Standby indicator: Lights up when the mains plug is connected to a wall socket and the power switch is in the off position
    • Loudness Indicator: Lights up when the loudness switch is activated
    • Line Direct Indicator: Lights up when the Line Straight switch is activated
    • Seperately Indicator: Lights up when the switch for disconnecting the preamp and power amplifier is activated
    • RCA terminal with 18 mm center distance
      • The introduction of RCA input and output terminals with 18 mm center distance allows the use of even high-quality connection cables with large plugs
    • Line-phase Sensor
    • Gold-plated input and output sockets
    • Cast iron damping feet
    • Aluminum remote control
    • ul>
    • The high-quality remote control with aluminum housing can also control suitable CD/SAC D players
  • This makes bi-amping possible or integration into an AV system
  • Monitor indicator: Lights up when the monitor switch is in the On position
  • Power indicator: The instruments display the level in decibels and are illuminated when the amplifier is turned on< /li>
  • Subsonic indicator: Lights up when the subsonic switch is switched on
  • Mono Indicator: Lights up when the mono switch is activated
    • Notes: Subsonic, mono and loudness can only be switched using the supplied remote control (RA-17A).
  • Standby indicator: Lights up when the mains plug is connected to a wall socket and the power switch is in the off position
  • Loudness Indicator: Lights up when the loudness switch is activated
  • Line Direct Indicator: Lights up when the Line Straight switch is activated
  • Seperately Indicator: Lights up when the switch for disconnecting the preamp and power amplifier is activated
    • Notes: Subsonic, mono and loudness can only be switched with the help of the supplied remote control (RA-17A).
    • The introduction of RCA input and output terminals with 18 mm center spacing allows the use of high-quality connection cables with large plugs
    • The high-quality remote control with aluminum housing can also control suitable CD/SAC D players
    • Extract from prospectus: L-590 AX
    • Extract from prospectus: L-590 AX Interior view
Search
Category