Luxman L-590AXII specifications

Category : Integrated amplifier

Brand : Luxman

General

connectors

Technical data

special features

manufacturer: Luxman
model: L-590 AX II
type: Class-A amplifier
year of construction: 2015 -
Manufactured in: Japan
color: Front silver, gray housing
remote control: Yes, RA-17A
power consumption: 350 W max., 1 W Stand-By
dimensions: 440 x 193 x 463 mm (WxHxD)
weight: 28.4 kg
factory price approx.: 8'690 euros

number of inputs:
- Phono MM: 2.5 mV, 47 kOhm
- Phono MC: 0.3 mV, 100 Ohm s
- Line 1, 2, 3, 4: 180 mV, 42 kOhm
- Balanced XLR 1, 2: 180 mV, 55 kOhm
- Tape Play: 180 mV, 42 kOhm
- Main: 550 mV / 47 K-ohms
number of outputs:
- Tape Rec: 180 mV
- Pre Out: 1 V
- headset:
- 2 pairs of Speakers

Phono MM: 2.5 mV, 47 kOhm
Phono MC: 0.3 mV, 100 Ohm s
Line 1, 2, 3, 4: 180 mV, 42 kOhm
Balanced XLR 1, 2: 180 mV, 55 kOhm
Tape Play: 180 mV, 42 kOhm
Main: 550 mV / 47 K-ohms

Tape Rec: 180 mV
Pre Out: 1 V
headphone:
2 pairs of Speakers

the duration of the performance Class A according to the manufacturer:
- 8 Ohm : 2 x 30 W (RMS , 20 Hz - 20 kHz)
- 4 Ohm : 2 x 60 W
the duration of the performance Class A in accordance with the test report, see below:
- 8 Ohm : 2 x 79 W
- 4 Ohm : 2 x 131 W
pulse power according to the test report:
- 8 Ohm : 2 x 97 W
- 4 Ohm s: 2 x 180 W
- 2 Ohm : 2 x 303 W
total harmonic distortion: < 0.005 %
damping factor: 320 at 8 Ohm s
frequency response:
- Phono MC 20 Hz - 20,000 Hz, ± 0.5 dB, Line, Straight on
- Phono MM: 20 Hz - 20,000 Hz, ± 0.5 dB, Line Straight
- switched to high level: 20 Hz - 100.000 Hz at -3 dB, Line Straight on
signal-to-noise ratio:
- Phono MC: > 75 dB
- Phono MM: > 91 dB
- high level: > 105 dB
stereo channel separation:
control:
- Bass: ± 8 dB at 100 Hz
- treble: ± 8 dB at 100 Hz
Loudness: + 7 dB at 100 Hz + 5 dB at 10 kHz
Low Filter (Subsonic): Yes
Mute: Yes

8 Ohm : 2 x 30 W (RMS , 20 Hz - 20 kHz)
4 Ohm : 2 x 60 W

8 Ohm : 2 x 79 W
4 Ohm : 2 x 131 W

8 Ohm : 2 x 97 W
4 Ohm s: 2 x 180 W
2 Ohm s: 2 x 303 W

Phono MC 20 Hz - 20,000 Hz, ± 0.5 dB, Line, Straight on
Phono MM: 20 Hz - 20,000 Hz, ± 0.5 dB, Line Straight
switched to high level: 20 Hz - 100.000 Hz at -3 dB, Line Straight

Phono MC is switched on: > 75 dB
Phono MM: > 91 dB
high level: > 105 dB

Bass: ± 8 dB at 100 Hz
height: ± 8 dB at 100 Hz

2 VU-meters
Pure Class-A operation
New LECUA – LUXMAN Electric Controlled Ultimate Attenuator 1000
- The new MECUA1000, which is a connection of an amplifier circuit and a high-precision volume control with an electrically controlled resistor chain is
- Further, it offers a finer volume resolution without any deterioration of the sound quality in a range of 0 dB to – 87dB
- is the Addition of a more sensitive setting the volume from 0 dB to 87 dB without any deterioration of the sound quality possible
and the power stage can be separated
- This Bi-Amping possible or involvement in an AV System
the Rec Out selector
Backlit display for:
- Monitor indicator: Lights up when the monitor switch is in the On Position
- power display: The instrument to show the level in decibels and are illuminated when the amplifier is turned on
- Subsonic display: Lights up, if the Subsonic switch is turned on
- Mono indicator: Lights when the mono switch is activated
  - notes: Subsonic, Mono, and Loudness can be achieved only with the help of the supplied remote control (RA-17A) is connected.
- Standby indicator: Lights up when the mains plug is connected to a wall outlet and the power switch in the off Position
- Loudness indicator: Lights up when the Loudness switch is enabled
- Line Directly in the display: Lights up when the Line Straight switch is enabled
- is Lit Separately display:, when the switch for the separation of Pre - and power amplifier is enabled
RCA Terminal with 18 mm wheelbase
- The introduction of RCA input and output terminals with 18 mm wheelbase also allows the use of high quality interconnect cables with large connectors
Line-Phase Sensor
gold-Plated input and output jacks
Damping feet made of cast iron
aluminum remote control
- The high quality remote control with aluminium housing can also be appropriate CD/SAC D players control

The new MECUA1000, which is a connection of an amplifier circuit and a high-precision volume control with an electrically controlled resistor chain is
Further, it offers a finer volume resolution without any deterioration of the sound quality in a range of 0 dB to – 87dB
in Addition, it is a more sensitive setting the volume from 0 dB to 87 dB without any deterioration of the sound quality possible

This Bi-Amping possible or involvement in an AV System

Monitor indicator: Lights up when the monitor switch is in the On Position
power display: The instrument to show the level in decibels and are illuminated when the amplifier is turned on
Subsonic indicator: Lights when the Subsonic filter switch is turned on
Mono indicator: Lights when the mono switch is activated
- notes: Subsonic, Mono and Loudness can be achieved only with the help of the supplied remote control (RA-17A) is connected.
Standby indicator: Lights up when the mains plug is connected to a wall socket and the power switch is in the off position
Loudness Indicator: Lights up when the loudness switch is activated
Line Direct Indicator: Lights up when the Line Straight switch is activated
Seperately Indicator: Lights up when the switch for disconnecting the preamp and power amplifier is activated