switchable mounting aid for quickly finding the respective inlet groove of 17 cm and 30 cm records
Tonearm lift with adjustable lowering speed
(from the manual), measured values = typical values. Determined rumbling and synchronisation values with paint film
Type of current: alternating current 50 Hz or 60 Hz
Mains voltages: 110 - 125 V and 220 - 240 V
Start-up time: (until the rated speed is reached) approx. 1.8 s at 33 rpm
Pitch tuning: in PPL technology, can be set separately to quartz accuracy for both speeds, control range & #177;5.5%
Speed control: quartz-accurate, STROBE light with automatic frequency switching for 33 rpm and 45 rpm
Sensitivity of the strobe light for 0.3 % Speed deviation: 20 strokes per minute (but I assume that this means: 20 strokes per x mm circumference - I will measure that later)
Interference voltage distance According to DIN 45 500, Rumble external voltage distance: 55 dB, rumble noise voltage distance: 78 dB
Contact force: continuously adjustable from 0 - 20 mN (0 - 2 p), with 1 mn (0.1 p) calibration in the range of 2 - 15 mn (0.2 - 1.5 p)
Pickup head removable, optimally adapted to ultra-low -Mass pickup systems with long carrier plate (in the accessory) also suitable for pickup systems with 1/2 " (inch) mounting and a dead weight of 2 g to 9 g (incl. Mounting material), Adjustable overhang: 5 mm
Other models of the same series:
CS 506
CS 522
CS 606
CS 622
CS 626
CS 650 RC
CS 714 Q
CS 714 Q MC
CS 731 Q
CS 731 Q MC
Picture: Dual CS 714 Q - General view
Picture: Dual CS 714 Q - Detail shot Adjustment unit