Removable 1/2 inch sound head carrier (headshell), OPS system (low-lying tonearm bearing) for better scanning of corrugated plates, gyroscopic cardan tonearm bearing with 4-point bearing, contact force control via torsion spring, low-mass aluminum tonearm, anti-skating adjustment, two-part turntable, quartz-controlled flat rotor motor with speed control via microprocessor, subchassis construction
Other models of the same series:
Dual CS 750
Dual CS 750-1
Dual Golden Stone
Dual Midnight
Dual Silver Stone
Image: Dual Golden 11
Device was the simplified successor of the Golden One. Tech nically and visually based on the CS 750. The difference is only in the piano lacquer console and the gold-plated metal parts. Overall, the execution is kept simpler than that of the Golden One. The turntable does not have an angled edge, the plate stabilizer is missing, the piano lacquer console has no recessed screw threads, the metal feet are also with a vertical edge and are no longer conical. The device was built only in a relatively small number of pieces by the company Alfred Fehrenbacher on behalf of Schneider AG. After the acquisition of the dual trademark rights by the Schneider Rundfunkwerke at the end of the eighties, the production of the turntables continued to be carried out in St. Georgen. At the beginning of the nineties, the company Fehrenbacher took over the production facility for turntables and initially continued to build devices with the DUAL logo exclusively for Schneider AG. Under the direction of the then Schneider Rundfunkwerke AG, numerous models were created, such as the CS 4xx series and the CS 750 model, from which models such as the Golden 11 and Golden / Silver Stone were then derived.