Yamaha RX-450 specifications

Category : Receiver

Brand : Yamaha

General

Connections

Technical data

Amplifiers

Tuners

Special equipment

Other models of the same series:

Successor model:

Number of inputs:
- Phono 2.5mV/47 k643961b8da111c0a15d770a1109a86d4
- Video/Aux, CD, Tape 150 mV/50 k643961b8da111c0a15d770a1109a86d4
- VHF antenna (75 ohm coax)
- Antenna MW (terminals)

the duration of the performance (total harmonic distortion)
- 8 643961b8da111c0a15d770a1109a86d4: 2x 40 Watt (0,04%)
- 4 643961b8da111c0a15d770a1109a86d4: 2x 55 watts (DIN)
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4: 2x 75 watts
- 4 643961b8da111c0a15d770a1109a86d4: 2x 100 watts
total harmonic distortion: 0.02% of
damping factor: > 50
frequency response: 20-20.000 Hz ± 0.5 dB (CD/TAPE/AUX)
signal-to-noise ratio: 82 dB (PHONO), 103 dB (CD/TAPE/AUX)
stereo channel separation: 52 dB
sound-control:
- Bass: ± 10 dB
- treble: ± 10 dB
Loudness: adjustable
High Filter : no
Low Filter (Subsonic): no
Mute: no
Direct/Line-Straight: CD-Direct

receiving: FM, MW
frequency:
- FM: 87.5 - 108.0 MHz
- MW: 531 - 1,611 kHz
frequency response:
- FM: 0 ± 1.5 dB (20Hz - 15kHz)
- MW:
input sensitivity:
- FM: 0.9 µV / 24 µV (Mono(26dB SNR)/Stereo(46dB-to-noise ratio))
- MW: 100 µV/m
total harmonic distortion:
- FM: 0,1/0,2% (Mono/Stereo)
- MW: 0,3%
signal-to-noise ratio:
- FM: 75/70 dB (Mono/Stereo)
- MW: 50 dB
channel separation: 50 dB
selectivity:
- FM: 50 dB
- MW: 32 dB
frequency selection: 1.5 dB
in addition to the wave selection: 70 dB
mirror frequency attenuation:
- FM: 80 dB
- MW: 40 dB
if rejection: 80 dB
ON-suppression: 55 dB
output level:
RDS: no
station memory: 16