Yamaha RX-550 specifications

Category : Receiver

Brand : Yamaha

General

connectors

Technical data

amplifier

Tuner

special features

Other models from the same series:

the previous model:

successor model:

number of inputs:
- Phono MM: 2.5 mV / 47kohms
- CD, AUX, TAPE1(Playback), TAPE2(Playback): 150mV / 47k643961b8da111c0a15d770a1109a86d4

Phono MM: 2.5 mV / 47kohms
CD, AUX, TAPE1(Playback), TAPE2(Playback): 150mV / 47k643961b8da111c0a15d770a1109a86d4

number of outputs:
- TAPE1(Record), TAPE2(Record):
- headphone: 0,49 V / 330 643961b8da111c0a15d770a1109a86d4s

the duration of the performance (total harmonic distortion)
- 8 643961b8da111c0a15d770a1109a86d4: 2 x 80 Watt (0,04%)
- 6 643961b8da111c0a15d770a1109a86d4s: 2x 100 Watt according to DIN
- 4 643961b8da111c0a15d770a1109a86d4: 2x 125 Watt according to DIN
- 2 643961b8da111c0a15d770a1109a86d4: 2x 160 Watt according to DIN
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4s: 100 W
- 6 643961b8da111c0a15d770a1109a86d4: 135 W
- 4 643961b8da111c0a15d770a1109a86d4s: 175 W
- 2 643961b8da111c0a15d770a1109a86d4s: 220 W
total harmonic distortion: %
damping factor (8643961b8da111c0a15d770a1109a86d4 1 kHz) 150 or more
frequency response: 0 ± 0.5 dB (CD/TAPE/AUX)
signal-to-noise ratio: dB (PHONO), dB (CD/TAPE/AUX)
stereo channel separation: dB
sound-control:
- Bass: ± 10dB(20Hz)
- treble: ± 10dB (20Hz)
Loudness:
Mute:

receiving: FM, MW
frequency:
- FM: 87.5 - 108.0 MHz
- MW: 531 - 1,611 kHz
frequency response:
- FM: 0 ± 1.5 dB (20Hz - 15kHz)
- MW:
input sensitivity:
- FM: 0.9 µV / 24µV (Mono(26dB SNR)/Stereo(46dB-to-noise ratio))
- MW: µV/m
total harmonic distortion:
- FM: 0,1%/0,2% (Mono/Stereo 1kHz))
- MW: %
signal-to-noise ratio:
- FM: /dB (Mono/Stereo)
- MW: dB
channel separation: 52dB
selectivity:
- FM: 50dB
- MW: 32dB
frequency selection:
in addition to the wave selection:
mirror frequency attenuation:
- FM: 75dB
- MW: 40dB
if rejection: 80dB
ON-suppression:
output level:
RDS: no
station memory: 40