Yamaha RX-10 RDS specifications
Category : Receiver
Brand : Yamaha
brand Yamaha
model: RX-10 RDS
special features
Other models from the same series:
- power supply: 230 V, 50 Hz
- power consumption: 115 W
- amplifier:
- the duration of the performance (total harmonic distortion):
- 8 Ohm s: 2 x 45 watts
- 4 Ohm : 2 x 55 watts
- total harmonic distortion: 0.02 pounds %
- damping factor: 100
- frequency response: 20-20.000 Hz, ± 0.5 dB (CD/Tape/AUX)
- signal-to-noise ratio:
- 82 dB (Phono)
- 108 dB (CD/Tape/AUX)
- control:
- Bass: ±10db (50Hz)
- Treble ±10 dB (20 kHz)sound
- Tape
- Pure Direct mode to bypass the tone controls
- Tuner:
- receiving: FM, MW
- frequency:
- FM: 87.5 - 108.0 MHz
- MW: 531 - 1,611 kHz
- frequency response:
- FM: 20Hz - 15kHz ,0 ± 1.5 dB
- noise:
- Mono: 26 dB
- Stereo: 46 dB
- RDS/PTY-Radio-Data-System
- station memory: 40
- connectors:
- inputs:
- Phono
- CD
- AUX
- Tape 1
- Tape 2
- outputs:
- Tape 1
- Tape 2
- headphones
- speakers: A, B
- dimensions (W x H x d): 280 x 120 x 370 mm
- weight: 7 kg
- the duration of the performance (total harmonic distortion):
- 8 Ohm s: 2 x 45 watts
- 4 Ohm : 2 x 55 watts
- total harmonic distortion: 0.02 pounds %
- damping factor: 100
- frequency response: 20-20.000 Hz, ± 0.5 dB (CD/Tape/AUX)
- signal-to-noise ratio:
- 82 dB (Phono)
- 108 dB (CD/Tape/AUX)
- control:
- Bass: ±10db (50Hz)
- Treble ±10 dB (20 kHz)sound
- Tape
- Pure Direct mode to bypass the tone controls
- 8 Ohm s: 2 x 45 watts
- 4 Ohm : 2 x 55 watts
- 82 dB (Phono)
- 108 dB (CD/Tape/AUX)
- Bass: ±10db (50Hz)
- Treble ±10 dB (20 kHz)
- receiving: FM, MW
- frequency:
- FM: 87.5 - 108.0 MHz
- MW: 531 - 1,611 kHz
- frequency response:
- FM: 20Hz - 15kHz ,0 ± 1.5 dB
- noise:
- Mono: 26 dB
- Stereo: 46 dB
- RDS/PTY-Radio-Data-System
- station memory: 40
- connectors:
- inputs:
- Phono
- CD
- AUX
- Tape 1
- Tape 2
- outputs:
- Tape 1
- Tape 2
- headphones
- speakers: A, B
- FM: 87.5 - 108.0 MHz
- MW: 531 - 1,611 kHz
- FM: 20Hz - 15kHz ,0 ± 1.5 dB
- Mono: 26 dB
- Stereo: 46 dB
- inputs:
- Phono
- CD
- AUX
- Tape 1
- Tape 2
- outputs:
- Tape 1
- Tape 2
- headphones
- speakers: A, B
- Phono
- CD
- AUX
- Tape 1
- Tape 2
- Tape 1
- Tape 2
- headphones
- speakers: A, B
- Separate Standby power transformer, thus a low power consumption in Stand-By
- 5 mm solid Aluminium front panel
Comment:
Comment box:
Yamaha RX-10 RDS relate