Technics SU-9600 specifications

General

Connections

Tech nical data

Special equipment

Number of inputs:
- Phono 1: 2mV / 25, 50, 100kOhm (selectable)
- Phono 2: 1-3mV / 25, 50, 100kOhm (selectable)
- 2x Band In: 100mV / 50kOhm
- 2x Aux: 100mV /50kOhm
Number of Outputs:
- 2x Band Out: 100mV/600Ohm
- 2x Pre Out: 1V/600Ohm (nominal value)

Frequency response:
- 2 - 100,000Hz (+0/-3dB)
- Phono: RIAA standard ±0.3dB
Total harmonic distortion : 0.02%
Signal to noise ratio:
External voltage ratio: (Rated power)
- Phono 1:73dB
- Phono 2: 67 - 76dB
- Tuner, AUX: 95dB
Stereo channel separation:
Tone control
- Treble: operating frequency 2 or 8kHz (selectable), ±12.5dB
Loudness: no
High Filter : Opera ting frequency 10 or 15kHz (selectable), -18dB/Oct.
Low Filter (Subsonic) Opera ting frequency: 30 or 15Hz (selectable), -18dB/Oct.
Mute: yes, -20dB
Direct/Line-Straight: yes

Channel-separated tone controls for bass and treble with switchable input frequency, switchable from the signal path; Switchable steep-sided subsonic filters (rumble filters) and noise filters with selectable input frequency
Very solid and encapsulated volume control, internally switches precision resistors channel-by-channel separately with maximum synchronization. Guaranteed >20 x 10 high6 adjustment cycles!
Two American standard mains sockets connected via the power switch of the device and four with continuous current on the back of the device