Technics SU-9200 specifications

General

Connections

Tech nical data

Special equipment

Number of inputs:
- Phono 1: 2 mV / 25, 50, 100 kOhm (selectable), max. 520 mV
- Phono 2: 2 - 10 mV / 25, 50, 100 kOhm (selectable)
- Tuner: 100 mV / 47 kOhm
- Aux 1, 2: 100mV / 47 kOhm
- Tape Play 1, 2: 100 mV / 47kOhm
Number of Outputs:
- Tape Rec 1, 2: : 100 mV / 500 Ohm
- Pre Out 1, 2: 1V / 500 Ohm (nominal value), max. 10 V

Frequency response:
- 7 - 110,000 Hz (+ 3 /- 0 dB)
- Phono: RIAA standard ±0.25 dB
Total harmonic distortion: 0.05 %
Signal to noise ratio:
External voltage ratio: (Rated power)
- Phono 1, 2: 70 dB
- Tuner, AUX: 90 dB
Tone control
- Bass: input frequency 125 or 500 Hz (selectable), ±7.5 dB
- Treble: Input frequency 2 or 8 kHz (selectable), ±7.5 dB
Loudness: no
High Filter : input frequency 10 or 10 kHz (selectable), ±High filter: Input frequency. 15 kHz (selectable), -12dB/Oct.
Low Filter (Subsonic) Opera ting frequency: 10 or 15 Hz (selectable), -12 dB/Oct.
Mute: yes, -20dB
Direct/Line-Straight: yes

Channel-separated tone controls for bass and treble with switchable input frequency, switchable from the signal path
Switchable steep-sided subsonic filters (rumble filters) and noise filters with selectable input frequency
Very solid and encapsulated volume control, switches internally Precision resistors separated channel by channel with maximum synchronisation. Guaranteed >20 x 10 high6 adjustment cycles!
Two American standard mains sockets connected via the power switch of the device and four with continuous current on the back of the device