Technics SA-5550 specifications
Category : Receiver
Brand : Technics
General
Connections
Technical data
Amplifier
Tuner
Special equipment
After the 4-channel era, this was the new receiver generation with the SA-5550 as the top model
- Manufacturer: Technics
- Model: SA 5550
- Years of construction: 1975 - 1977
- Manufactured in: Japan
- Color: Silver, case wood veneered or black (foiled?)
- Remote control: No
- Power consumption: 610 watts
- Dimensions: 459 x 140 x 400 mm (WxHxD)
- Weight: 12.8 kg
- Factory price approx.: 1.400,- DM
- Number of inputs: 6
- Phono: 2.5 mV/ 50 k643961b8da111c0a15d770a1109a86d4
- Aux: 180 mV/ 40 k643961b8da111c0a15d770a1109a86d4
- Tape Playback 1 + 2: 180 mV/ 40 k643961b8da111c0a15d770a1109a86d4
- Tape 1 (DIN): 150 mV/ 35 k643961b8da111c0a15d770a1109a86d4
- Antenna (screw terminals)
- VHF: 75 643961b8da111c0a15d770a1109a86d4
- VHF: 300 643961b8da111c0a15d770a1109a86d4
- MW
- Number of outputs: 6
- Tape Playback 1 + 2: 180 mV/ 40 k643961b8da111c0a15d770a1109a86d4
- Tape 1 (DIN): 150 mV/ 35 k643961b8da111c0a15d770a1109a86d4)
- 4-CH MPX Out (RCA)
- Headphones (6.3mm jack)
- Speakers 2 pairs (screw terminals )
- Phono: 2.5mV/ 50 k643961b8da111c0a15d770a1109a86d4
- Aux: 180 mV/ 40 k643961b8da111c0a15d770a1109a86d4
- Tape Playback 1 + 2: 180 mV/ 40 k643961b8da111c0a15d770a1109a86d4
- Tape 1 (DIN): 150 mV/ 35 k643961b8da111c0a15d770a1109a86d4
- Antenna (screw terminals)
< li>FM: 75 643961b8da111c0a15d770a1109a86d4
- FM: 300 643961b8da111c0a15d770a1109a86d4
- MW
FM: 75 643961b8da111c0a15d770a1109a86d4 - FM: 300 643961b8da111c0a15d770a1109a86d4
- MW
- Tape Playback 1+2: 180 mV/40 k643961b8da111c0a15d770a1109a86d4
- Tape 1 (DIN): 150 mV/ 35 k643961b8da111c0a15d770a1109a86d4)
- 4-CH MPX Out (RCA)
- Headphones (6.3mm jack)
- Speakers 2 pairs (screw terminals)
- Continuous power (20Hz - 20kHz, max. 0,3 %)
- 8 643961b8da111c0a15d770a1109a86d4: 2x 58 W
- 4 643961b8da111c0a15d770a1109a86d4: 2x 72 W
- Dynamic power
- 8 643961b8da111c0a15d770a1109a86d4: 2x 74 W
- 4 643961b8da111c0a15d770a1109a86d4: 2x 100 W
- Total harmonic distortion: 0,1%
- Attenuation factor: 40 (8 ohm)
- Frequency response:
- Power bandwidth: 5 - 45'000 Hz (- 3 dB) both channels at 8 643961b8da111c0a15d770a1109a86d4
- Aux: 5 - 90'000 Hz (+ 1 dB, -3dB)
- Phono: RIAA (± 0.5 dB)
- Signal-to-noise ratio (IHF A):
- External voltage ratio (at rated power):
- Stereo channel separation:
- Tone control: < ul>
- Bass: 50 Hz, ± 10 dB
- Treble: 10 kHz, ± 10 dB
Loudness: Yes (50 Hz, ± 10 dB) High Filter : Yes (7 kHz, - 6 dB/Oct.) Low Filter (Subsonic): Yes (150 Hz, - 6 dB/Oct.) Mute: no- 8 643961b8da111c0a15d770a1109a86d4: 2x 58 W
- 4 643961b8da111c0a15d770a1109a86d4: 2x 72 W
- 8 643961b8da111c0a15d770a1109a86d4: 2x 74 W
- 4 643961b8da111c0a15d770a1109a86d4: 2 x 100 W
- power bandwidth: 5 - 45'000 Hz (- 3 dB) both channels into 8 643961b8da111c0a15d770a1109a86d4s
- Aux: 5 - 90'000 Hz (+1 dB, -3dB)
- Phono: RIAA (± 0.5 dB)
- Bass: 50 Hz, ± 10 dB
- treble: 10 kHz ± 10 dB
- receiving: FM/MW
- frequency:
- FM: 88 - 108 MHz
- MW: 530 - 1605 KHz
- input sensitivity:
- frequency response:
- FM: 20 - 15,000 Hz (± 1 dB)
- total harmonic distortion:
- FM Stereo: 0.4% a
- UKB Mono: 0,2%
- signal-to-noise ratio: 70 dB
- s / n ratio:
- channel separation:
- 1 kHz: 40 dB
- 10 kHz: 30 dB
- selectivity:
- frequency selection:
- in addition to the wave selection: 65 dB
- mirror frequency attenuation:
- ZF-loss:
- ON-suppression: 50 dB
- FM: 88 - 108 MHz
- MW: 530 - 1605 KHz
- FM: 20 - 15,000 Hz (± 1 dB)
- FM Stereo: 0.4% a
- UKB Mono: 0.2% of the
- 1 kHz: 40 dB
- 10 kHz: 30 dB
- Separate the signal strength and the Ratio tuning meters
- FM Muting
- Tape monitor circuit for tape monitoring (for both Tape lines)
- Tape Dubbing to Dub from tape device
- the device to band Prepared for 4-channel FM operation (was realized by the broadcasters never)
- 2 pairs of Speakers can be connected (switchable)
Comment:
Comment box:
Technics SA-5550 relate