Technics SA-5070 specifications

Category : Receiver

General

connectors

Technical data

amplifier

Tuner

special features

number of inputs:
- Phono: 2,5 mV / 47 K-ohms
- Aux: 150 mV / 33 k643961b8da111c0a15d770a1109a86d4
- Tape: 180 mV / 39 k643961b8da111c0a15d770a1109a86d4
- antenna FM (75/300 643961b8da111c0a15d770a1109a86d4), AT
number of outputs:
- Tape Rec: 150 mV
- Tape Rec DIN: 30 mV
- headphone (6.3 mm Jack)
- 2 pairs of Speakers

continuous power output (20-20.000 Hz)
- 8 643961b8da111c0a15d770a1109a86d4: 2x 15 W
- 4 643961b8da111c0a15d770a1109a86d4: 2x 18 W
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4s:
- 4 643961b8da111c0a15d770a1109a86d4:
total harmonic distortion: 0,5%
damping factor:
frequency response:
- 20 - 20,000 Hz (±0.8 dB)
- power range: 5 - 30.000 Hz (-3 dB)
signal-to-noise ratio:
s / n ratio: (at nominal power)
- Phono: 65 dB
- AUX: 78 dB
stereo channel separation:
sound-control:
- Bass: 50 Hz, ±10 dB
- treble: 10 kHz, ±10 dB
Loudness: Yes
High Filter : no
Low Filter (Subsonic): no
Mute: FM Muting
Direct/Line-Straight: no

receiving: FM, MW
frequency:
- FM:
- MW:
frequency response:
- FM: 20 - 15,000 Hz (+1/-2 dB)
input sensitivity:
- FM: 1,9 µV (300 643961b8da111c0a15d770a1109a86d4), 0,9 µV (75 643961b8da111c0a15d770a1109a86d4)
- MW: 30 µV, 300 µV/m
total harmonic distortion:
- FM: 0,35 % (Stereo),
signal-to-noise ratio:
s / n ratio:
- FM: 58 dB (Stereo)
channel separation:
- FM: 42 dB
selectivity:
- FM: 65 dB
- MW: 30 dB
frequency selection:
- FM: 1.5 dB
in addition to the wave selection: 75 dB
mirror frequency attenuation:
- FM: 55 dB
- MW: 40 dB
ZF-loss:
- FM: 80 dB
- MW: 40 dB
ON-suppression: 55 dB