Technics SA-303 specifications

Category : Receiver

General

connectors

Technical data

amplifier

Tuner

number of inputs:
- Phono: 2,5 mV / 47 K-ohms
- Aux: 150 mV / 27 kω
- Tape 1: 180 mV / 27 kω
- Tape 1: 150 mV / 27 kω
- antenna FM (75/300 643961b8da111c0a15d770a1109a86d4), AT
number of outputs:
- 1x Tape (RCA/DIN)
- headphone (6.3 mm Jack, front)
- 2 pairs of Speakers

continuous power output (1 kHz / 20-20 Jack, front).000 Hz)
- 8 643961b8da111c0a15d770a1109a86d4: 2x 45 W / 2x 40 W
- 4 643961b8da111c0a15d770a1109a86d4: 2x 50 W / 2x 45 W
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4s:
- 4 643961b8da111c0a15d770a1109a86d4:
total harmonic distortion: 0,04% (8 643961b8da111c0a15d770a1109a86d4, rated power, 20-20.000 Hz)
damping factor:
frequency response:
- Phono: RIAA ±0.8 dB
- Aux: 20 - 20,000 Hz (±0.2 dB)
signal-to-noise ratio: (IHF-A)
- Phono: 80 dB
- Aux: 95 dB
stereo channel separation:
sound-control:
- Bass: 50 Hz, ±10 dB
- height: 20 kHz, ±10 dB
Loudness: Yes
High Filter : Yes
Low Filter (Subsonic): no
Mute: FM Muting
Direct/Line-Straight: no

receiving: FM, MW
frequency:
- FM: 88 - 108 MHz
- MW: 525 - 1605 Khz
frequency response:
- FM: 20 - 15,000 Hz (+1/-2 dB)
input sensitivity:
- FM: 1,9 µV (300 643961b8da111c0a15d770a1109a86d4, 30 dB S/R)
- MW: 30 µV (20 dB S/R)
total harmonic distortion:
- FM: 0,3% (Stereo),
signal-to-noise ratio:
- FM: 60 dB (Stereo), 75 dB (IHF-A)
channel separation:
- FM: 45 dB
selectivity:
- FM: 70 dB
- MW: 30 dB
frequency selection: 1.2 dB
in addition to the wave selection: 70 dB
mirror frequency attenuation: 70 dB
if rejection: 70 dB
ON-suppression: 50 dB