Sony TA-E 9000 ES specifications

Brand : Sony

General

connectors

Tech nical data

special features

number of inputs (Analog):
- PHONO: sensitivity: 5 mV; impedance: 50 ohms
- LINE( TUNER, CD, MD/DAT, TAPE, TV(TV/DB S), DVD, LD, VIDEO1, VIDEO2, and VIDEO3): sensitivity: 250 mV; impedance: 50 kOhm
inputs (DIGITAL)
- DVD(Coaxial): sensitivity: 0.5 VPP; impedance: 75 Ohm s
- LD (AC-3 RF): impedance: 75 Ohm s
- LD (Coaxial): sensitivity: 0.5 VPP; impedance: 75 Ohm s
- CD (Coaxial): sensitivity: 0.5 VPP; impedance: 75 Ohm s
- MD/DAT
- TV (TV/DB S)
- LD (optical)
- DVD (optical)
outputs (Analog):
- MD/DAT, TAPE(REC OUT), VIDEO1, VIDEO2, VIDEO3 (REC OUT): voltage: 250 mV; impedance: 1 kOhm
- PRE OUT (FRONT L/R, CENTER, REAR L/R WOOFER): voltage: 1 V; impedance: 200 Ohm
- PHONES: headphones low or high-impedance
outputs (Digital):
- MD/DAT (optical): sampling frequency: 48 kHz

PHONO: sensitivity: 5 mV; impedance: 50 ohms
LINE( TUNER, CD, MD/DAT, TAPE, TV(TV/DB S), DVD, LD, VIDEO1, VIDEO2, and VIDEO3): sensitivity: 250 mV; impedance: 50 ohms

MD/DAT, TAPE(REC OUT), VIDEO1, VIDEO2, VIDEO3 (REC OUT): voltage: 250 mV; impedance: 1 kOhm
PRE OUT (FRONT L/R, CENTER, REAR L/R WOOFER): voltage: 1 V; impedance: 200 Ohm s
PHONES: headphones low or high-impedance

total harmonic distortion: < 0,05 %(in the case of circumvention of the sound field and Equalizer circuits)
frequency response:
- PHONO: 20Hz – 20kHz, RIAA _+ 0.5 dB
- LINE (TUNER, CD, MD/DAT, TAPE, TV(TV/DB S), DVD, LD, VIDEO1, VIDEO2, and VIDEO3): 20 Hz – 20 kHz; +0/-0.2 dB(in the case of circumvention of the sound field and Equalizer circuits)
Signal-to-noise ratio:
- DIGITAL IN: 100 dB(20 kHz low-pass Filter , A)
- PHONO: 82 dB (A)
- LINE: 94 dB (20 kHz low-pass Filter , A)
sound-control:
- BASS: 100 Hz – 1.0 kHz (21 steps)
- MID: 99 Hz – 8.6 kHz (41 levels)
- TREBLE: 1.0 kHz – 10 kHz (21 steps)
- gain level: -/+ 10 dB, 1 dB steps
Decodierbare digital formats:
- Dolby Digital (AC-3 )
- MPEG
- DTS
- Linear PCM

PHONO: 20Hz – 20kHz, RIAA _+ 0.5 dB
LINE (TUNER, CD, MD/DAT, TAPE, TV(TV/DB S), DVD, LD, VIDEO1, VIDEO2, and VIDEO3): 20 Hz – 20 kHz; +0/-0.2 dB(in the case of circumvention of the sound field and Equalizer circuits)

inputs: 1 VP-p, 75 Ohm s
outputs: 1 VP-p, 75 Ohm s
S-video inputs:
- luminance signal: 1 VP-p, 75 Ohm s
- chroma signal: 0,286 VP-p, 75 Ohm s

video output 2/2001; a place 1/6 of the Test: "very good" (83 out of 100 points), "test winner"
- rated positive: "high power reserve, bridge operation, stable voltage behavior, excellent values"