Setton RS-660 specifications
Category : Receiver
Brand : Setton
General
Connections
Technical data
Amplifier
Tuner:
External Dolby FM adapter:
Special features
- Manufacturer: Setton
- Model: RS-660
- Type: Receiver
- Years of construction: 1977 - 1981
- Manufactured in: Japan
- Color: Front silver, case wood foil
- Power consumption: 450 W max.
- Dimensions: 570 x 170 x 300 mm (WxHxD)
- Weight: approx. 17 kg
- Factory price approx.: 2'498 DM
- Number of inputs:
- Phono (MM) switchable High: 2.5 mV, max. 150 mV, Low: 5 mV, max. 300 mV
- Microphone: 6 mV, 10 k643961b8da111c0a15d770a1109a86d4
- Aux 1, 2: 150 mV
- Tape Play 1, 2: 150 mV
- Tape 2 DIN: 150 mV
- Antenna (FM: 75, 300 ohm, AM)
- Number of Outputs:
- Tape Rec 1, 2: 150 mV
- Tape 2 DIN: 30 mV
- Headphones: 6.3mm Jack plug
- 3 pairs of speakers
- Phono (MM) switchable High: 2.5 mV, max. 150 mV, Low: 5 mV, max. 300 mV
- microphone: 6 mV, 10 k643961b8da111c0a15d770a1109a86d4
- Aux 1, 2: 150 mV
- Tape Play 1, 2: 150 mV
- Tape 2 DIN: 150 mV
- antenna (FM: 75, 300 643961b8da111c0a15d770a1109a86d4, AM)
- Tape Rec 1, 2: 150 mV
- Tape 2 DIN: 30 mV
- headphones: 6.3 mm Jack
- 3 pairs of Speakers
- the duration of the performance (total harmonic distortion):
- 8 643961b8da111c0a15d770a1109a86d4: 2 x 100 W (RMS , 20 Hz to 20,000 Hz)
- 4 643961b8da111c0a15d770a1109a86d4: 2x 120 W (1 kHz)
- dynamic power:
- 8 643961b8da111c0a15d770a1109a86d4s:
- 4 643961b8da111c0a15d770a1109a86d4:
- total harmonic distortion: 0.07 to % at rated power
- damping factor: 45 (1 kHz, 8 643961b8da111c0a15d770a1109a86d4)
- frequency response: 20 - 40,000 Hz
- power range: 5 - 40,000 Hz
- signal-to-noise ratio:
- Phono Low: 90 dB
- Phono High: 65 dB
- AUX: 90 dB
- Tape: 90 dB
- stereo channel separation:
- control the sound:
- Bass: ± 10 dB, switchable at 62 Hz, 125 Hz
- Kippfrequenzen switchable: 250 Hz, 500 Hz
- in the Middle: ± 6 dB, 1 kHz
- treble: ± 10 dB, switchable at 10 kHz, 20 kHz
- Kippfrequenzen switchable: 2.5 kHz, 5 kHz
- Loudness: + 12 dB at 50 Hz, + 3.5 dB at 10 kHz
- High Filter : - 3 dB, 12 dB / octave, switchable at 7 kHz, 12 kHz
- Low Filter (Subsonic): - 3 dB, 12 dB / octave, switchable at 15 Hz, 40 Hz
- Audio Muting: -20 dB
- 8 643961b8da111c0a15d770a1109a86d4: 2 x 100 W (RMS , 20 Hz to 20,000 Hz)
- 4 643961b8da111c0a15d770a1109a86d4: 2x 120 W (1 kHz)
- 8 643961b8da111c0a15d770a1109a86d4s:
- 4 643961b8da111c0a15d770a1109a86d4:
- Phono Low: 90 dB
- Phono High: 65 dB
- AUX: 90 dB
- Tape: 90 dB
- Bass: ± 10 dB, switchable at 62 Hz, 125 Hz
- Kippfrequenzen switchable: 250 Hz, 500 Hz
- in the Middle: ± 6 dB, 1 kHz
- treble: ± 10 dB, switchable at 10 kHz, 20 kHz
- Kippfrequenzen switchable: 2.5 kHz, 5 kHz
- Kippfrequenzen switchable: 250 Hz, 500 Hz
- Kippfrequenzen switchable: 2.5 kHz, 5 kHz
- receiving: FM, AM
- frequency:
- FM: 88 - 108 MHz
- MW: 525 - 1605 kHz
- input sensitivity:
- frequency response: 30 - 15 000 Hz
- total harmonic distortion: Stereo 0,4 %, Mono 0,15 % at 1 kHz
- signal-to-noise ratio:
- FM: 72 dB Mono, 67 dB in Stereo
- AT the: 45 dB
- Stereo channel separation: > 40 dB at 1 kHz
- separation
- contrast: the same shaft selection: 1.0 dB
- in addition to the wave selection: 100 dB
- mirror frequency attenuation:
- ZF-loss:
- ON-suppression: 65 dB
- FM Muting
- MPX-Filter
- FM: 88 - 108 MHz
- MW: 525 - 1605 kHz
- FM: 72 dB Mono, 67 dB at Stereo
- AT the: 45 dB
- De-Emphasis: 25 µs
- output voltage to an external Dolby Adapter: 0,77 V (100 % Mod.)
- Overload indicator 3-fold, electronic protection circuit
- Ceramic filters
- Mono / stereo changeover switch
- Microphone mixer, 6.3mm jack plug Front side
- Tone Linear switch
Tuner: Setton TUS-600- Report from "Hifi Studio" on the RS-220: [1]
Comment:
Comment box:
Setton RS-660 relate