Setton RS-220 specifications

Category : Receiver

Brand : Setton

General

Connections

Technical data

Amplifier

Tuner:

Special equipment

  • Manufacturer: Setton
  • Model: RS-220
  • Type: Receiver
  • Years of construction: 1977 - 1981
  • Made in: Japan
  • Color: Front silver, housing wood foil
  • Power consumption: 330 W max.
  • Dimensions: 540 x 170 x 300 mm (WxHxD)
  • Weight: approx. 12.8 kg
  • Factory price approx.: 1'498 DM
  • Number of inputs:
    • Phono (MM) switchable High: 2.5 mV, max. 150 mV, Low: 5 mV, max. 300 mV
    • Aux: 150 mV
    • Tape Play 1, 2: 150 mV
    • Tape 2 DIN: 150 mV
    • Antenna (FM: 75, 300 ohm, AM)
  • Number of Outputs:
    • Tape Rec 1, 2: 150 mV
    • Tape 2 DIN: 30 mV
    • Headphones: 6.3mm Jack plug
    • 2 pairs of speakers
  • Phono (MM) switchable High: 2.5mV, max. 150 mV, Low: 5 mV, max. 300 mV
  • Aux: 150 mV
  • Tape Play 1, 2: 150 mV
  • Tape 2 DIN: 150 mV
  • antenna (FM: 75, 300 643961b8da111c0a15d770a1109a86d4, AM)
  • Tape Rec 1, 2: 150 mV
  • Tape 2 DIN: 30 mV
  • headphones: 6.3 mm Jack
  • 2 pairs of Speakers
  • the duration of the performance (total harmonic distortion):
    • 8 643961b8da111c0a15d770a1109a86d4: 2x 40 W (RMS , 20 Hz to 20,000 Hz), 2x 45 W (1 kHz)
    • 4 643961b8da111c0a15d770a1109a86d4: 2x 60 W (1 kHz)
  • dynamic power:
    • 8 643961b8da111c0a15d770a1109a86d4s:
    • 4 643961b8da111c0a15d770a1109a86d4:
  • total harmonic distortion: 0,1 %, 0,05% at 1000 Hz
  • damping factor: 30 (1 kHz, 8 643961b8da111c0a15d770a1109a86d4)
  • frequency response: 20 - 20,000 Hz
  • power bandwidth: 10 - 35,000 Hz
  • signal-to-noise ratio:
    • Phono Low: 70 dB
    • Phono High: 65 dB
    • AUX: 85 dB
    • Tape: 85 dB
  • stereo channel separation:
  • sound-control:
    • Bass: ± 12 dB, 50 Hz
    • in the Middle: ± 6 dB, 1 kHz
    • treble: ± 10 dB, 10 kHz
  • Loudness: + 12 dB at 50 Hz, + 3.5 dB at 10 kHz
  • High Filter : - 10 dB at 10 kHz
  • Low Filter (Subsonic):
  • 8 643961b8da111c0a15d770a1109a86d4: 2x 40 W (RMS , 20 Hz to 20,000 Hz), 2x 45 W (1 kHz)
  • 4 643961b8da111c0a15d770a1109a86d4: 2x 60 W (1 kHz)
  • 8 643961b8da111c0a15d770a1109a86d4s:
  • 4 643961b8da111c0a15d770a1109a86d4:
  • Phono Low: 70 dB
  • Phono High: 65 dB
  • AUX: 85 dB
  • Tape: 85 dB
  • Bass: ± 12 dB, 50 Hz
  • in the Middle: ± 6 dB, 1 kHz
  • height: ± 10 dB, 10 kHz
  • receiving: FM, AM
  • frequency:
    • FM: 88 - 108 MHz
    • MW: 525 - 1605 kHz
  • input sensitivity:
    • FM: 2,0 µV
    • MW: 25 µV
  • frequency response: 30 - 15 000 Hz
  • total harmonic distortion: Stereo 0,4 %, Mono 0,15 % at 1 kHz
  • signal-to-noise ratio:
    • FM: 70 dB
    • ON: 45 dB
  • Stereo channel separation: > 40 dB at 1 kHz
  • selectivity:
    • FM: 70 dB
    • MW: 45 dB
  • frequency selection: 1.25 dB
  • in addition to the wave selection: 70 dB
  • mirror frequency attenuation:
    • FM: 55 dB
    • MW: 40 dB
  • ZF-loss:
    • FM: > 80 dB
    • MW: > 85 dB
  • ON-suppression: 65 dB
  • FM Muting
  • MPX-Filter
  • FM: 88 - 108 MHz
  • MW: 525 - 1605 kHz
  • FM: 2,0 µV
  • MW: 25 µV
  • FM: 70 dB
  • AT the: 45 dB
  • FM: 70 dB
  • MW: 45 dB
  • FM: 55 dB
  • MW: 40 dB
  • FM: > 80 dB
  • MW: > 85 dB
  • overload display, 3-way, electronic circuit protection
  • ceramic filters
  • Mono / Stereo switch
  • pre-amplifier:
  • Setton HP-5500
  • Report from "Hifi Studio" on the RS-220: [1]

Setton RS-220

Setton RS-220


Comment:



Comment box:


Setton RS-220 relate