Pioneer A-656 MK II specifications

Brand : Pioneer

General

Connections

Technical data

Number of inputs:
- 1x Phono (RCA): 2.5mV / 50 kOhm (MM), 0.2mV / 100 Ohm (MC)< /li>
- CD, Tuner, Line, 3x Tape In (RCA): 150 mV / 50 kOhm
Number of Outputs:
- 3x Tape Out (RCA): 150 mV / 2.2 kOhm
- Headphones (6.3mm jack)
- 2 speaker pairs

Continuous power (with total harmonic distortion)
- 8 Ohm s: 2x 80 W (0.005%)
- 4 Ohm s: 2x 120 W (0.008%)
- 2 Ohm s: 2x 160 W (0.008%)
Dynamic power
- 8 Ohm : 2x 140 W
- 4 Ohm : 2x 200 W
- 2 Ohm : 2x 260 W
Total harmonic distortion: 0.008%
Attenuation factor: 200 / 70 (8 ohm, 1 kHz / 20 - 20 kHz)
Frequency response: 5 - 80,000 Hz (0.05%, 8 ohms)
Signal-to-noise ratio: 95dB / 77dB
Stereo channel separation:
Tone control:
- Bass: yes, ±8db (100 Hz)
- Treble: yes, ± 8db (10kHz)
Loudness: yes, +5db(100Hz)/+3db(10kHz)
High Filter : no
Low Filter (Subsonic): yes, 17Hz (12db/oct.)
Mute: no
Direct/Line-Straight: yes

Excerpt from review: c279c1ef3fe7ca1956b057d2e95af71b PMA-860, Dual CV-5670, 3498f73c37688adb1a96fc0533245fad 56 II, Sony TA-F 5 50 ES

External differences from the A-656: smaller rotary knobs replaced by cylindrical versions similar to the large knobs.
Golden dot only on the volume potentiometer
Inside: still horizontal boards, but already no honeycomb housing around the volume potentiometer at the back right of the device

Pioneer A-656 MK II