Pioneer A-405 R specifications

Brand : Pioneer

General

Connections

Technical data

Special equipment

Number of inputs: 6 RCA
- PHONO (MM): 2,8mV/ 50 kOhm
- TUNER, CD, LINE, TAPE 1/DAT, TAPE 2/MONITOR: 200 mV/50 kOhm

PHONO (MM): 2.8mV/ 50 kOhm

TUNER, CD, LINE, TAPE 1/DAT, TAPE 2/MONITOR: 200 mV/50 kOhm

< li>TAPE 1/DAT, TAPE 2/MONITOR: 200 mV/1 kOhm

Continuous power (with total harmonic distortion)
- 8 Ohm s: 2 x 45 watts (0,06 %)
- 4 ohms: 2 x 65 Watts (0,09 %)
Dynamic power:
- 4 ohms: 100 watts
Total harmonic distortion: 0,05 % (20- 20.000 Hz, 20 watts, 8 ohms)
Attenuation factor: ?
Frequency response:
- PHONO (MM): 20- 20,000 Hz, +/- 0.5 dB
- TUNER, CD, LINE, TAPE 1/DAT, TAPE 2/MONITOR: 5- 150,000 Hz, +0/-3 dB
Signal-to-noise ratio:
- PHONO (MM, 5 mV input) : 86 dB
- PHONO (MM): 71/67 dB according to DIN (continuous power/50 mW)
- TUNER, CD, LINE, TAPE 1/DAT, TAPE 2/MONITOR: 106 dB
- TUNER, CD, LINE, TAPE 1/DAT, TAPE 2/MONITOR: 95/ 71 dB according to DIN (continuous power/ 50 mW)
Stereo channel separation: ?
Tone Control: analog
- Bass: +/- 8dB (100 Hz)
- Treble: +/- 8dB (10 kHz)
Loudness: Yes, Button
High Filter : No
Low Filter (Subsonic): No
Mute: No
Direct/Line - Straight: Yes

PHONO (MM, 5 mV input): 86 dB
PHONO (MM): 71/67 dB according to DIN (continuous power/50 mW)
TUNER, CD, LINE, TAPE 1/DAT, TAPE 2/MONITOR: 106 dB
TUNER, CD, LINE, TAPE 1/DAT, TAPE 2/MONITOR: 95/ 71 dB according to DIN (continuous power/ 50 mW)

Rec Selector (simultaneous listening to one source and recording another)
SR bus output for controlling further Pioneer Hifi components via the remote control of the amplifier
Metal front panel
Power switch on the back of the device
1x Euro socket (max. 100 W)
2 speaker pairs connectable, separately or simultaneously switchable (A / B / A+B)
Gold-plated headphone jack
Balance controller