the duration of the performance (total harmonic distortion)
8 643961b8da111c0a15d770a1109a86d4: 2x 60 W (0.005%)
4 643961b8da111c0a15d770a1109a86d4: 2x 80 W (0.008%)
2 643961b8da111c0a15d770a1109a86d4: 2 x 100 W (0.008%)
dynamic performance
8 643961b8da111c0a15d770a1109a86d4: 2x 80 W
4 643961b8da111c0a15d770a1109a86d4: 2x 120 W
2 643961b8da111c0a15d770a1109a86d4: 2x 160 W
Total Harmonic Distortion
20 Hz~20 kHz 60 Watt 8 Ω 0.008%
20 Hz~20 kHz 60 Watt 4 Ω 0.02%
frequency response:
PHONO (MM) 20 HZ to 20kHz ± 0.3 dB
PHONO (MC) 20 HZ to 20kHz ± 0.5 dB
total harmonic distortion: 0.008 in %
signal-to-Noise ratio: 107 dB
inputs:
PHONO (MC/MM)
TUNER
CD
Line/AUX
2x TAPE/MD/DAT
Auftrennbare and the power stage (IN-OUT/PRE-OUT)
connections for 2 pairs of Speakers A + B can be switched individually
Controller:
volume
Balance
bass
height
Muting button
Loudness button
Subsonic button
Line Direct-switch
8 643961b8da111c0a15d770a1109a86d4: 2x 60 W (0.005%)
4 643961b8da111c0a15d770a1109a86d4: 2x 80 W (0.008%)
2 643961b8da111c0a15d770a1109a86d4: 2 x 100 W (0.008%)
8 643961b8da111c0a15d770a1109a86d4: 2x 80 W
4 643961b8da111c0a15d770a1109a86d4: 2x 120 W
2 643961b8da111c0a15d770a1109a86d4s: 2x 160 W
PHONO (MM) 20 HZ to 20kHz ± 0.3 dB
PHONO (MC) 20 HZ to 20kHz ± 0.5 dB
PHONO (MC/MM)
TUNER
CD
Line/AUX
2x TAPE/MD/DAT
volume
Balance
bass
height
Super-Linear Circuit (SLC): By lifting the non-linearity of a component by means of the complementary non-linearity of the other to be the lowest possible distortion, greater stability and a flatter frequency response. Overall, better sound reproduction is achieved thanks to the excellent open-loop frequency response.
Recording selector switch with six positions.
Honeycomb rib-reinforced chassis, honeycomb-structured heat sink and honeycomb damper feet to protect resonances and microphone effects.
Digitally compatible sound quality even at low impedances: High stability against the fluctuations of the impedance curve.
"Non-Switching" type II: amplification without switching distortions; improved thermal stability and high linearity for natural sound.
Direct Connection: The signal reaches the output by the shortest path and thus contributes to the purity of the sound.
Clean ground system: Ground side free of seepage components due to chassis insulated against transformers and heat sinks.
DIRECT switch: For direct switching to the volume control.
Outputs for two pairs of speakers: Either separate or shared operation.