Luxman R-1120 specifications

Category : Receiver

Brand : Luxman

General

connectors

Technical data

amplifier

Tuner

special features

Number of inputs:
- Phono MC 1: 0.18mV / 47k643961b8da111c0a15d770a1109a86d4, max. 160 mV (1 kHz)
- Phono MM 2: 2.7mV / 47k643961b8da111c0a15d770a1109a86d4, max. 150 mV (1 kHz)
- Tape 1, 2: 180 mV / 30k643961b8da111c0a15d770a1109a86d4
- Aux: 180 mV/ 30k643961b8da111c0a15d770a1109a86d4
- Main In: 1.6V
- VHF/ MW (75 and 300 ohms)
Number of Outputs:
- Tape Rec 1, 2:
- Pre Out:
- Headphones:
- 2 pairs of speakers

the duration of the performance (total harmonic distortion)
- 8 643961b8da111c0a15d770a1109a86d4: 2x 120 W (RMS , 20Hz - 20Khz, < 0,02 %)
- 4 643961b8da111c0a15d770a1109a86d4: 2x 175 W
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4s:
- 4 643961b8da111c0a15d770a1109a86d4:
total harmonic distortion: 0.02 pounds %
damping factor: 60 at 8 643961b8da111c0a15d770a1109a86d4s
frequency response: 15 Hz - 100 kHz (- 1 dB)
signal-to-noise ratio:
- Phono: > 86 dB
- Tape, Aux: > 100 dB
- Stereo channel separation: 75 dB (1Khz)
sound-control:
- Bass switchable:
  - 200 Hz: ± 6 dB at 100 Hz
  - 400 Hz: ± 11 dB at 100Hz
- high-frequency switchable:
  - 2 kHz: ± 13 dB at 10 kHz
  - 4 kHz: ± 8 dB at 10 kHz
Subsonic Filter : 6 dB / octave below 45 Hz
height of the filter: 6 dB / octave above 7 kHz
Loudness: ± 8 dB at 100 Hz (Volume -30dB)
Muting: Yes

receiving: FM, MW
frequency:
- FM: 87.5 - 108 MHz
- MW: 535 - 1605 kHz
any additional information for FM
frequency response: 30 Hz to 15 kHz, ± 1 dB
input sensitivity: 1,4 µV
total harmonic distortion:
- Mono:
  - 0,06 % (Wide, 1 kHz)
  - 0,06 % (Wide, 1 kHz)
  - 0,12 % (Wide, 6 kHz)
  - 0,2 % (Narrow, 10 kHz)
- Stereo:
  - 0,015 % (Wide, 100 Hz)
  - 0,1 % (Wide, 1 kHz)
  - 0,2 % (Wide, 6 kHz)
  - 0,5 % (Narrow, 10 kHz)
signal-to-noise ratio:
- Mono: 75 dB
- Stereo: 70 dB
stereo channel separation:
- 45 dB (Wide, 100 Hz)
- 48 dB (Wide, 1 kHz)
- 40 dB (Wide, 10 kHz)
- 30 dB (Narrow, 1 kHz)
selectivity: 70 dB
frequency selection:
- Wide: 0.9 dB
- Narrow: 1.9 dB
in addition to the wave selection: 100 dB
mirror frequency attenuation: > 85 dB
ZF-loss: > 90 dB
ON-suppression: > 62 dB

Mono:
- 0,06 % (Wide, 1 kHz)
- 0,06 % (Wide, 1 kHz)
- 0,12 % (Wide, 6 kHz)
- 0,2 % (Narrow, 10 kHz)
Stereo:
- 0,015 % (Wide, 100 Hz)
- 0,1 % (Wide, 1 kHz)
- 0,2 % (Wide, 6 kHz)
- 0,5 % (Narrow, 10 kHz)

12 LED peak value display for L + R separately
- Peak Indicators: -24 / -21 / -18 / -15 / -12 / -9 / -6 / -3 / 0 / + 3 dB
- power limitation - 12 dB, switchable
Separate speaker output for Electrostatic
display instruments for the rational middle -, and field strength
Dubbing
FM Muting
FM Dolby retrofit
Mono / Stereo switchable