Kenwood KR-A 5010 specifications

Category : Receiver

Brand : Kenwood

General

connectors

Technical data

amplifier

Tuner

Other models from the same series:

Receiver:

A/V-Receiver:

CD player:

Tape deck:

CD (RCA) (150mV/47k643961b8da111c0a15d770a1109a86d4) (10Hz - 70kHz +0dB/-3dB)
Tape-1 (RCA) (150mV/47k643961b8da111c0a15d770a1109a86d4) (10Hz - 70kHz +0dB/-3dB)
Tape 2 (RCA) (150mV/47k643961b8da111c0a15d770a1109a86d4) (10Hz - 70kHz +0dB/-3dB)
Video 1 (RCA) (150mV/47k643961b8da111c0a15d770a1109a86d4) (10Hz - 70kHz +0dB/-3dB)
Video 2 (RCA) (150mV/47k643961b8da111c0a15d770a1109a86d4) (10Hz - 70kHz +0dB/-3dB)
Phono (MM) (RCA) (2.5 mV/ 47kohms)
FM antenna (75/300 643961b8da111c0a15d770a1109a86d4)
ON-the-antenna (terminals)
2 x system control (Jack)

number of outputs:
- Tape 1 Rec (RCA)
- Tape 2 Rec (RCA)
- 2 x 2 speakers (terminals)
- headphone (6.3 mm

the duration of the performance (total harmonic distortion)
- 8 643961b8da111c0a15d770a1109a86d4: 2 x 60 W (IEC ) ( <0,7 % total harmonic distortion)
- 4 643961b8da111c0a15d770a1109a86d4: 2 x 60 W (DIN 1 kHz)
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4s:
- 4 643961b8da111c0a15d770a1109a86d4:
total harmonic distortion: 0.1 % (1 kHz, 8 643961b8da111c0a15d770a1109a86d4)
damping factor:
frequency response:
signal-to-noise ratio:
stereo channel separation:
tone control Graphic Equalizer
- mid-frequencies: 60 Hz, 300 Hz, 1 kHz, 3 kHz, 10 kHz
- control range +/- 12 dB
- Bass:
- height:
Loudness:
High Filter :
Low Filter (Subsonic):
Mute: Yes
Direct/Line-Straight:

8 643961b8da111c0a15d770a1109a86d4: 2 x 60 W (IEC ) ( <0,7 % total harmonic distortion)
4 643961b8da111c0a15d770a1109a86d4: 2 x 60 W (DIN 1 kHz)

receiving: FM AM
frequency:
- FM: 87.5 MHz - 108 MHz
- AM: 530 kHz and 1610 kHz (10 kHz channel spacing) 530 kHz - 1602 kHz (9 kHz channel spacing)
frequency response: 30 Hz - 15 kHz (+1.0 dB / -2,5 dB)
antenna impedance:
- FM: 75 643961b8da111c0a15d770a1109a86d4 unbalanced
input sensitivity:
- FM:
- ON: 10 µV
total harmonic distortion: (1kHz)
- FM: Mono 0,2 % , Stereo 0,3 %
- ON: 0,45 %
signal-to-noise ratio: 65 dBf (IHF)
- FM: Mono: 78 dB , Stereo: 72 dB
- ON: 50 dB
channel separation:
selectivity:
- FM:
  - IHF: 11,8 dBf (2,0 µV 300 643961b8da111c0a15d770a1109a86d4)
  - DIN: Mono: 0.9 µV Stereo: 25 µV
- ON: 25 dB
frequency selection:
in addition to the wave selection:
mirror frequency attenuation:
ZF-loss:
ON-suppression:
output level:
RDS: no
station memory: 20

FM: 87.5 MHz - 108 MHz
AM: 530 kHz and 1610 kHz (10 kHz channel spacing) 530 kHz - 1602 kHz (9 kHz channel spacing)