Kenwood KR-A 5050 specifications

Category : Receiver

Brand : Kenwood

General

connectors

Technical data

amplifier

Tuner

special features

number of inputs:
- 1x Phono MM (RCA)
- 1x CD/AUX In (RCA)
- 2x Tape In (RCA)
- 2x Video In (RCA)
- FM antenna
- ON-antenna
number of outputs:
- 2x Tape Out (RCA)
- headphone (6.3 mm Jack)
- 2 pairs of Speakers

the duration of the performance (total harmonic distortion)
- 8 643961b8da111c0a15d770a1109a86d4: 2x 105 W (IHF'66) - Jack)
- 4 643961b8da111c0a15d770a1109a86d4:
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4s:
- 4 643961b8da111c0a15d770a1109a86d4:
THD: 0,03% (1 kHz, 50 W, 8 643961b8da111c0a15d770a1109a86d4s)
damping factor:
frequency response (IHF'66): 20 to 20,000 Hz
signal-to-noise ratio (IHF'66):
- Phono MM: 73 dB
- Line: 100 dB
stereo channel separation:
control:
- Bass: Yes (±10 dB at 100 Hz)
- treble sound: Yes (±10 dB at 10 kHz)
Loudness: Yes (at -30dB volume up to approx. +8 dB at 100 Hz)
High Filter :
Low Filter (Subsonic):
Mute: Yes
Direct/Line-Straight:

receiving: FM, AM
frequency:
- FM: 87.5 - 108 MHz
- ON (at 9kHz steps): 531 - 1602 kHz
- ON (10kHz steps): 530 - 1610 kHz
frequency response: 30 - 15,000 Hz
input sensitivity:
- FM: 1.3 µF
- ON: 40 µF
total harmonic distortion: FM: 0,4% (Mono), and 0.5% (Stereo) (at 65 dBf input signal)
total harmonic distortion: AT: 0,5% (Mono), 0,4% (Stereo),
signal-to-noise ratio:
- FM: 78 dB (Mono), 73 dB (Stereo) (at 65 dBf input signal)
- ON: 50 db (30% mod. 1 mV input signal)
Channel separation:
Selectivity:
Common wave selection:
Secondary wave selection:
Mirror frequency attenuation:
IF attenuation:
Output level:
RDS: yes
Station memory: yes/20