Kenwood KR-3200 specifications

Category : Receiver

Brand : Kenwood

General

connectors

specifications Tuner section

Technical data amplifier

special features

Phono MM: 3 mV, 50 k643961b8da111c0a15d770a1109a86d4s
AUX: 180 mV, 50 k643961b8da111c0a15d770a1109a86d4s
Tape Play:
- RCA: 200 mV, 45 k643961b8da111c0a15d770a1109a86d4
- DIN: 30 mV, 80 k643961b8da111c0a15d770a1109a86d4
antenna FM (75 643961b8da111c0a15d770a1109a86d4 Unbalanced / 300 643961b8da111c0a15d770a1109a86d4 Balanced), AT

Tape Rec:
- RCA: 150 mV, 100 643961b8da111c0a15d770a1109a86d4s
- DIN: 30 mV, 80 k643961b8da111c0a15d770a1109a86d4
headphones: 6.3 mm Jack
2 pairs of Speakers

receiving: FM, MW
frequency:
- FM: 87.5 - 108 MHz
- MW: 525 - 1605 kHz
frequency response: 20 - 15,000 Hz (+ 0,5, - 2 dB, FM)
input sensitivity:
- FM: 2,3 µV (IHF)
- MW: 25 µV
total harmonic distortion:
- FM: 0,5 % (Mono), and 0.9 % (Stereo),
- mesh size: 0.5 %
signal-to-noise ratio:
- FM: 69 dB (Mono), 63 dB (Stereo)
- MW: 45 dB
channel separation:
- FM: 40 dB (at 1 kHz)
selectivity: (IHF)
- FM: 50 dB
- MW: 30 dB
frequency selection:
- FM: 3.5 dB
in addition to the wave selection:
- FM: 60 dB
mirror frequency attenuation:
- FM: 90 dB
- MW: 35 dB
ZF-loss:
- FM: 80 dB
ON-suppression: 60 dB

continuous power:
- 8 643961b8da111c0a15d770a1109a86d4: 2 x 17 W (20 - 20,000 Hz)
- 4 643961b8da111c0a15d770a1109a86d4: 2 x 20 W (1 kHz)
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4: 42 W
- 4 643961b8da111c0a15d770a1109a86d4: 60 W
total harmonic distortion: 1,0% (at nominal power)
damping factor: 50 (8 643961b8da111c0a15d770a1109a86d4)
frequency response: 25 - 25,000 Hz ± 1 dB)
power bandwidth: 25 - 35,000 Hz
signal-to-noise ratio:
- Phono: 63 dB
- AUX, Tape: 75 dB
sound-control:
- Bass: ± 10 dB at 100 Hz
- treble: ± 10 dB at 10 kHz
Loudness: + 8 / + 5 dB (100 Hz / 10 kHz)
Noise Filter : - 10 dB at 10 kHz
Mute: FM Muting