Kenwood KR-5600 specifications

Category : Receiver

Brand : Kenwood

General

connectors

Technical data

amplifier

Tuner

special features

2x Tape Out (RCA/DIN): 150 mV / 100 643961b8da111c0a15d770a1109a86d4s (RCA); 30 mV / 80 643961b8da111c0a15d770a1109a86d4 (DIN)
Adapter Out
FM Quad radial
headphone (6.3 mm Jack, front)
2 pairs of Speakers

continuous power
- 8 643961b8da111c0a15d770a1109a86d4: 2x 40 W (20-20.000 Hz)
- 8 643961b8da111c0a15d770a1109a86d4: 2x 43 watts (1 kHz)
- 4 643961b8da111c0a15d770a1109a86d4: 2x 48 watts (1 kHz)
total distortion: 0.06% (at 1 Watt), and 0.5% (at nominal power)
inter-modulation distortion: 0,5% (60/7.000 Hz, 4:1, at nominal power)
damping factor: 40 (8 643961b8da111c0a15d770a1109a86d4)
frequency response:
- pre-amplifier: 20 - 50,000 Hz
- performance range: 7 - 35.000 Hz
signal-to-noise ratio:
- Phono MM: 70 dB
- AUX, Tape: 90 dB
stereo channel separation:
sound-control:
- Bass: ±8 dB at 100 Hz
- treble: ±8 dB at 10 kHz
Loudness: +8/+5 dB (100 Hz/10 kHz)
High Filter : -10 dB at 10 kHz, 6 dB/octave
Low Filter (Subsonic): no
Mute: FM Muting
Direct/Line-Straight: no
output impedance 4 - 16 643961b8da111c0a15d770a1109a86d4s

receiving: FM, MW
frequency:
- FM: 87.5 - 108 MHz
- MW: 525 - 1605 kHz
frequency response: 20 - 15,000 Hz (+0/-1.5 dB, FM)
input sensitivity:
- FM: 1,8 µV (IHF), 50 dB signal to noise ratio of 3.0 µV (mono) / 37 µV (stereo)
- am: 20 µV
total harmonic distortion:
- FM: 0,15% (Mono) to 0.25% (Stereo),
signal-to-noise ratio:
- FM: 75 dB (Mono), 70 dB (Stereo)
- MW: 50 dB
channel separation:
- FM: 40 dB (at 1 kHz), 35 dB (50 to 10,000 Hz)
selectivity: (IHF)
- FM: 80 dB
- MW: 35 dB
frequency selection:
- FM: 1.5 dB
in addition to wave of oppression:
- FM: 85 dB
mirror frequency suppression:
- FM: 85 dB
- MW: 45 dB
ZF-suppression:
- FM: 100 dB
ON-suppression: 65 dB
carrier suppression: 40 dB
antenna inputs 75 643961b8da111c0a15d770a1109a86d4 & 300 643961b8da111c0a15d770a1109a86d4s

FM: 1,8 µV (IHF) in 50 dB signal to noise ratio of 3.0 µV (mono) / 37 µV (stereo)
am: 20 µV

stages directly coupled to the Amplifier, real-complementary output stage, the devices such as the Equalizer, you can grind
a Separate Phono pre-amplifier with DLNOA-IC
FM input stage with Dual -gate MOS-FET
frequency linear tuning capacitor
Broadband FM Demodulator, linear calibrated FM Scala with 200 kHz spacing
Signal Meter (field strength), and Tuning Meter (FM-channel center)
if-amplifier with ceramic Filter s
Selectable De-emphasis for broadcast Dolby Adapter, connector for Dolby Adapter