Kenwood KR-3090 specifications

Category : Receiver

Brand : Kenwood

General

connectors

Technical data

amplifier

Tuner

number of inputs:
- Phono MM (RCA): 2,5 mV / 50 K-ohms
- 1x Tape In (RCA/DIN): 150 mV / 45 k643961b8da111c0a15d770a1109a86d4
- Aux (RCA): 150 mV / 45 k643961b8da111c0a15d770a1109a86d4
- antenna FM (75/300 643961b8da111c0a15d770a1109a86d4), AT
number of outputs:
- 1x Tape Out (RCA/DIN):
- headphone (6.3 mm Jack, front)
- 2 pairs of Speakers

continuous power
- 8 643961b8da111c0a15d770a1109a86d4: 2x 26 W (20-20 Jack, front).000 Hz)
- 4 643961b8da111c0a15d770a1109a86d4:
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4s:
- 4 643961b8da111c0a15d770a1109a86d4:
total harmonic distortion: 0.05% (at nominal power)
damping factor:
frequency response:
- power bandwidth: 10 - 50,000 Hz
signal-to-noise ratio: (IHF-A)
- Phono MM: 77 dB
- AUX, Tape: 100 dB
stereo channel separation:
control:
- Bass: ±8 dB at 100 Hz
- treble sound: ±8 dB at 10 kHz
Loudness: +10 dB (100 Hz)
High Filter : no
Low Filter (Subsonic): no

receiving: FM, MW
frequency:
- FM: 87.5 - 108 MHz
- MW: 525 - 1605 kHz
frequency response: 20 - 15,000 Hz
input sensitivity:
- FM: 1,3 µV (IHF)
- am: 20 µV
total harmonic distortion: (1kHz)
- FM: 0,15% (Mono) 0.3% (in Stereo)
signal-to-noise ratio: (IHF-A)
- FM radio: 76 dB (Mono), 72 dB (Stereo)
- MW: 50 dB
channel separation:
- FM: 40 dB (at 1 kHz)
selectivity:
- FM: 54 dB
frequency selection:
- FM: 1.5 dB
in addition to the wave selection:
- FM: 75 dB
mirror frequency attenuation:
- FM: 60 dB
- MW: 50 dB
ZF-loss:
- FM: 90 dB
ON-suppression: 55 dB