Kenwood KA-8150 specifications

Brand : Kenwood

General

Connections

Technical data

Special equipment

Number of outputs: 3
- Tape Rec.: 150mV/220Ohm
- Headphones: 6.3mm jack
- 2 pairs of speakers
- Pre-Out: 1.0V/470Ohm

the duration of the performance (total harmonic distortion)
- 8 Ohm s: 75W + 75W
- 4 Ohm : 90W + 90W
dynamic performance
- 8 Ohm s:
- 4 Ohm : 330W
total harmonic distortion:
- to 0.03% at rated power at 8 Ohm s
- 0.01% at 1W into 4 Ohm s
damping factor: 50 8Ohm
frequency response: 5 - 50000 Hz
- Phono: RIAA Standard +/- 0.2 dB
- Aux/Tape: 7 - 50000 Hz +0dB / -1dB
signal-to-noise ratio: 115dB
sound control(can be switched off):
- Bass: Yes (150 or 400 Hz switchable) +/- 7.5 dB
- height: Yes (3 or 6 kHz switchable) +/- 7.5 dB
Loudness: Yes (6 steps)
- 50Hz: +3dB/+6dB/+9dB
- 100Hz: +3dB/+6dB/+9dB
High Filter : Yes 8kHz/12dB / octave
Low Filter : Yes - 40Hz/12dB / octave
Subsonic Filter : Yes - 18Hz/6dB / octave
Mute: no, but a Gain Control switch -10dB/ 0 / +10dB
Direct/Line-Straight: Yes - in the Turnover-switches the sound controller

Pre - and power amp separable over the bridge connector on the back
Double power supply, separately for both channels
current limiter circuit to protect the amplifier and the loudspeaker in case of Overload and short-circuit
DC-coupled amplifier
Rack handles optional
corresponds exactly to the KA-8100, only the front panel of color was only in the Military market sold