Kenwood KA-9300 specifications
Category : Integrated amplifier
Brand : Kenwood
General
Connections
Technical data
Special equipment
Other models of the same series:
Kenwood recommended the speakers: Kenwood Model Seven
- Manufacturer: Kenwood
- Model: KA-9300 (similar to Model 600 , but toroidal transformers, front in the design of the KA-3300 series...KA-8300, no 220/240V version)
- Type: Stereo Integrated amplifier
- Years of construction: 1975 - 1976
- Manufactured in: Japan
- Color: Silver
- Power consumption: 290 W (Model 600: 790W max., probably due to another measurement method)
- Dimensions (WxHxD): 440 x 154 x 388 mm
- Weight: 20.1kg
- Factory price approx.: pure Japan device, not available in Germany
- Number of inputs:
- Input sensitivity:
- Phone 1 MM: 2.5mV, 30 kOhm , 60 kOhm , 100 kOhm , max. 220mV
- Phone 2 MM: 2.5 - 5mV, adjustable, 50 kOhm , max. 220mV
- Tuner: 150mV, 50 kOhm
- AUX 1,2: 150mV, 50 kOhm
- Tape Play A, B: 150mV, 50 kOhm
- Number of Outputs:
- Line: 150mV, 80 kOhm
- DIN: 80mV, 150 kOhm
- Speakers: Direct, A, B (Model 600: A, B, C)
- Headphones
Input sensitivity: Phone 1 MM: 2.5mV, 30 kOhm , 60 kOhm , 100 kOhm , max. 220mV Phone 2 MM: 2.5 - 5mV, adjustable, 50 kOhm , max. 220mV Tuner: 150mV, 50 kOhm AUX 1,2: 150mV, 50 kOhm Tape Play A, B: 150mV, 50 kOhm - Line: 150mV, 80 kOhm
- DIN: 80mV, 150 kOhm
- Speaker : Direct, A, B (Model 600: A, B, C)
- Headphones
- Continuous power (with total harmonic distortion)
- 8 Ohm s: 2x 130W (RMS , 20 Hz ... 20 kHz, 0.08% THD), 2x 135W (8 Ohm , 1kHz)
- 4 Ohm : 2x 150W (4 ohm, 1kHz)
- Dynamic power
- Total harmonic distortion: 0.08% THD at 8 Ohm
- Attenuation factor: 50 to 8 ohm
- Frequency response: 5 Hz - 50 kHz
- Signal-to-noise ratio:
- Tone control
- Bass:
- 150Hz : ± 7.5dB at 40Hz
- 400Hz : ± 7.5dB at 100Hz
- Treble:
- 3kHz : ± 7.5dB at 10kHz
- 6kHz : ± 7.5dB at 20kHz
- Loudness (-30dB) : +2 / +4 / +6 / + 8dB at 100Hz
- High Filter : 8kHz, 12dB/octave
- Low Filter : 40Hz, 12dB/octave
- Presence :
- +6dB at 800Hz
- +6dB at 3kHz
- 8 Ohm : 2x 130W (RMS , 20 Hz ... 20 kHz, 0.08% THD), 2x 135W (8 Ohm , 1kHz)
- 4 Ohm : 2x 150W (4 Ohm , 1kHz)
- Bass:
- 150Hz : ± 7.5dB at 40Hz
- 400Hz : ± 7.5dB at 100Hz
- Treble:
- 3kHz : ± 7.5dB at 10kHz
- 6kHz : ± 7.5dB at 20kHz
150Hz : ± 7.5dB at 40Hz - 400Hz : ± 7.5dB at 100Hz
- 3kHz : ± 7.5dB at 10kHz
- 6kHz : ± 7.5dB at 20kHz
- +6dB at 800Hz
- +6dB at 3kHz
- Power attenuator: 0 dB, -15 dB, -30 dB
- Loudness 4-stage
- Preamplifier and power amplifier can be separated
- Amplifier
- Amplifier Model x00
Kenwood KA-1500 Kenwood KA-3300 Kenwood KA-3500 Kenwood KA-550 0 Kenwood KA-7300 Kenwood KA-8300 - Review of "Good Old Hifi": [1]
Comment:
Comment box:
Kenwood KA-9300 relate