Kenwood KA-8006 specifications

Category : Integrated amplifier

Brand : Kenwood

General

Connections

Technical data

Special equipment

  • Manufacturer: Kenwood
  • Model: KA-8006 (US version)< /li>
  • Type: Integrated amplifier
  • Years of construction: 1974 - 1976
  • Manufactured in: Japan
  • Color: Silver, Wooden Side panels
  • Power consumption:
  • Dimensions (WxHxD): 435 x 157 x 300 mm
  • Weight: 13.5 Kg
  • Factory price approx.: 95'000 Yen (Japan, 1974) (this corresponds to about 1'450 DM, but as far as is known, these amplifiers were not sold in Europe)
  • Number of inputs:
    • Input sensitivity:
    • Phono 1 MM: 2.5mV, switchable 30 kOhm , 50 kOhm , max. 250 mV
    • Phono 2 MM: 2.5mV, 50 kOhm , max. 250 mV
    • Microphone: 2.5mV, 50 kOhm
    • Tuner: 150mV, 50 kOhm
    • AUX 1, 2: 150mV, 50 kOhm
    • Tape Play 1, 2: 150mV, 50 kOhm
    • Tape Play DIN 1, 2:
    • Main In: 1 V, 50 kOhm
  • Number of outputs:
    • Outputs:
    • Tape Rec 1, 2: 150mV, 50 kOhm
    • Tape Rec DIN 1, 2: 40mV, 70 kOhm
    • Pre-Out: 1 V, 100 Ohm
    • Headphones: 4 - 16 Ohm
    • Connectors for 3 speaker pairs
  • Input sensitivity:
  • Phono 1 MM: 2.5mV, switchable 30 kOhm , 50 kOhm , max. 250 mV
  • Phono 2 MM: 2.5mV, 50 kOhm , max. 250 mV
  • Microphone: 2.5mV, 50 kOhm
  • Tuner: 150mV, 50 kOhm
  • AUX 1, 2: 150mV, 50 kOhm
  • Tape Play 1, 2: 150mV, 50 kOhm
  • Tape Play DIN 1, 2:
  • Main In: 1 V, 50 kOhm
  • Outputs:
  • Tape Rec 1, 2: 150mV, 50 kOhm
  • Tape Rec DIN 1, 2: 40mV, 70 kOhm
  • Pre-Out: 1 V, 100 ohm
  • Headphones: 4 - 16 ohm
  • Connectors for 3 speaker pairs
  • Continuous power (with total harmonic distortion)
    • 8 Ohm s: 2x 70W (RMS , 20Hz...20kHz)
    • 4 Ohm :
  • Dynamic power
    • 8 Ohm :
    • 4 Ohm :
  • Total harmonic distortion: 0.2% THD at 8 ohm
  • Attenuation factor: 30 at 8 ohm
  • Frequency response: 20 - 20' 000 Hz
  • Signal to Noise Ratio:
    • Phono 1.2: 76 dB
    • Microphone: 76 dB
    • Tuner: 90 dB
    • AUX 1, 2: 90 dB
    • Tape Play A, B: 90 dB
  • Tone Control
    • Bass:
      • 200Hz : ± 10 dB at 50 Hz
      • 400Hz : ± 10 dB at 100 Hz
    • Treble:
      • 3kHz : ± 10 dB at 3 kHz
      • 6kHz : ± 10 dB at 10 Khz
  • Loudness: +8dB at 100Hz, +3dB at 10kHz
  • High Filter : 6dB/Oct. at 7 kHz / 12 kHz
  • Low Filter : 12 dB/Oct. at 20 Hz / 40 Hz
  • Low Filter (Subsonic): +18dB/Oct. at 20Hz
  • Attenuator: 0 dB, - 20 dB
  • 8 Ohm : 2x 70W (RMS , 20Hz...20kHz)
  • 4 Ohm :
  • 8 Ohm :
  • 4 Ohm :
    • Phono 1.2: 76 dB
    • Microphone: 76 dB
    • Tuner: 90 dB
    • AUX 1, 2:90 dB
    • Tape Play A, B : 90 dB
    • Bass:
      • 200Hz : ± 10 dB at 50 Hz
      • 400Hz : ± 10 dB at 100 Hz
    • Treble:
      • 3kHz : ± 10 dB at 3 Khz
      • 6kHz : ± 10 dB at 10 kHz
    • 200Hz : ± 10 dB at 50 Hz
    • 400Hz : ± 10 dB at 100 Hz
    • 3kHz : ± 10 dB at 3 kHz
    • 6kHz : ± 10 dB at 10 kHz
    • 2 microphone inputs on the front panel
    • Tape Dubbing
    • Other models of the same series:
      • KA-3006
      • KA-4006
      • KA-5006< /li>
      • KA-6006
      • KA-7006
      • KA-8006
      • KA-9006
  • KA-3006
  • KA-4006
  • KA-5006
  • KA- 6006
  • KA-7006
  • KA-8006
  • KA-9006
  • Kenwood KA-8006


    Comment:



    Comment box:


    Kenwood KA-8006 relate