Kenwood KA-2600 specifications

Category : Integrated amplifier

Brand : Kenwood

General

Connections

Technical data

Special equipment

Manufacturer: Kenwood
Model: KA-2600
Years of construction: 1968 - 1971
Manufactured in: Japan
Color: Silver, Wooden Side panels
Type: Amplifier
Power consumption: 110 W at full scale, 15 W without signal
Dimensions (WxHxD): 408 x 134 x 280 mm
Weight: 7.5 Kg
Factory price approx.: 37500 yen (Japan, 1969), 600 DM

Inputs:
- Input sensitivity:
- Phono 1 MM: 2 mV, 50 kOhm , max. 180 mV
- Phono 2 MM: 2 mV, 50 kOhm , max. 180 mV
- Microphone: 2 mV, 100 kOhm
- Tuner: 200mV, 50 kOhm
- AUX: 200mV, 50 kOhm
- Tape Play: 200mV, 50 kOhm
  - Tape DIN:
- Main In: 100 mV, 100 kOhm
Outputs:
- Tape Rec: 200 mV
  - DIN: 40 mV
  - Dubbing: 200 mV
- Pre-Out:
- Headphones:
- Connectors for 2 pairs of speakers

< ul>

Input sensitivity:

Phono 1 MM: 2 mV, 50 kOhm , max. 180 mV

Phono 2 MM: 2 mV, 50 kOhm , max. 180 mV

Microphone: 2 mV, 100 kOhm

Tuner: 200mV, 50 kOhm

AUX: 200mV, 50 kOhm

Tape Play: 200mV, 50 kOhm

Tape DIN:

Main In: 100 mV, 100 kOhm

Tape DIN:

Tape Rec: 200 mV
- DIN: 40 mV
- Dubbing: 200 mV
Pre-Out:
Headphones:
Connectors for 2 pairs of speakers

DIN: 40 mV
Dubbing: 200 mV

Continuous power (with total harmonic distortion)
- 8 Ohm : 2x24 W (RMS , 20Hz...20kHz, 0.05% THD), 2x 18W (8 Ohm , 1kHz)
- 4 Ohm : 2x33 W
Dynamic power
- 8 Ohm : 55 W IHF
- 4 Ohm : 70 W IHF
Total harmonic distortion: 0.5% THD at Rated power from 20 - 20000 Hz
Attenuation factor: 56 to 8 ohms
Frequency response: 15 - 70,000 Hz, ± 1 dB
Power bandwidth: 15 - 70,000 Hz, - 3 dB
Signal-to-noise ratio:
- Phono: 65 dB
- Microphone: 65 dB
- Tuner: 80 dB
- AUX: 80 dB
- Tape Play: 80 dB
Tone Control
- Bass: ± 10 dB at 100 Hz
- Treble: ± 10 dB at 10 kHz
Loudness: + 10 dB at 100 Hz, + 5 dB at 10 kHz
High Filter : 6dB/Oct. at 8kHz
Low Filter : 6dB/Oct. at 80Hz
Muting: 0 dB, - 20 dB

8 Ohm : 2x24 W (RMS , 20Hz...20kHz, 0.05% THD), 2x 18W (8 ohms, 1kHz)
4 Ohm s: 2x33 W

8 Ohm s: 55 W IHF
4 Ohm s: 70 W IHF

Phono: 65 dB
Microphone: 65 dB
>Tuner: 80 dB
AUX: 80 dB
Tape Play: 80 dB

Bass: ± 10 dB at 100 Hz
Treble: ± 10 dB at 10 Khz

Preamp and power amplifier separable
Mono /Stereo Changeover Switch
Mono Center Channel Output
Tape Dubbing 6.3mm jack connector on front panel

Other models of the same series:
- Kenwood KA-2600 :
  - KA-2600
- Kenwood KA-400 0:
  - KA-4000
  - Kenwood KA-60 00:
    - KA-6000
Kenwood KA-2600 :
- KA-2600

Kenwood KA-400

KA-4000

Kenwood KA-60 00:
- KA-6000

KA-2600

KA-4000

KA-6000

Vorgängermodell :
- Predecessor model

Predecessor model

Successor model:
- Trio KA-3002; Due to the current source situation, probably exclusively under Trio (for the Japanese, possibly US market?) manufactured:
  - KA-3002
- Kenwood KA-400 2 (New designline):
  - KA-4002

KA-3002

Kenwood KA-400 2 (New Designline):
- KA-4002

KA-3002

KA-4002

Corresponding Tuners:
- Kenwood KT-50 00
  - KT-5000
- Kenwood KT-7000
  - KT-7000

Kenwood KT- 5000
- KT-5000
Kenwood KT-7000
- KT-7000

KT-5000

KT-7000

Kenwood recommended:
- Denoiser Kenwood KF-8011
  - KF-8011
- Oscilloscope Kenwood KC-6060
  - KC-6060
- Oscilloscope Kenwood KC-6060 A (successor model available from 1971)
  - KC-6060 A

Denoiser Kenwood KF-8011
- KF-8011
Oscilloscope Kenwood KC-6060
- KC- 6060
Kenwood KC-6060 A oscilloscope (successor model available from 1971)
- KC-6060 A

KF-8011

KC-6060

KC-6060 A

The devices were sold outside Japan under the "brand name" Kenwood. In Japan and partly in other markets, the company name Trio was used. The company was renamed Kenwood Corporation only in 1986 (source Wikipedia).