Kenwood KA-3300 D specifications

Brand : Kenwood

General

connectors

Technical data

special features

number of inputs:
- Phono 1, 2 MM: 2.5 mV / 47 K-ohms
- Phono MC: 0.1 mV / 100 Ohm s
- Tuner: 150 mV / 47 K-ohms
- AUX 1, 2 / D. A. D. back and Front, switchable: 150 mV / 47 K-ohms
- Tape Play 1, 2: 150 mV / 47 K-ohms
- Main-In:
number of outputs:
- Tape Rec 1, 2:
- Pre-Out:
- headphones
- 2 pairs of Speakers

the duration of the performance (total harmonic distortion)
- 8 Ohm : 2x 160 W at 0.7 %
- 4 Ohm : 2x 220 W
dynamic performance
- 8 Ohm : 2x 178 W
- 4 Ohm : 2x 320 W
total harmonic distortion: 0.07 to %
damping factor: 1'000 (50Hz)
frequency response: 1 - 150 kHz (-3dB)
signal-to-noise ratio:
- Phono MM: 87 dB
- Phono MC: 76 dB
- high level: 110 dB
control:
- Bass: ± 10 dB
  - frequency: 200 Hz tone, 400 Hz
- treble: ± 10 dB
  - Frequency: 3 kHz, 6 kHz,
Loudness: 0 to 8 dB, switchable 30 Hz / 90 Hz
High Filter : no
Low Filter (Subsonic): 6 dB / octave below 18Hz
Mute: Yes, on - 30 dB
Line Straight: Yes
sampling frequencies: 32 kHz, 44.1 kHz, 48 kHz

sound Linear switch
Mono switch
Dynamic Linear Drive amplifier
channel-separated 16-Bit D/A Converter (High-Speed, chain-wire networks)
digital filter with four times Oversampling
7-pin FDNR-Butterworth low-pass
Versatile compatibility by three sampling frequencies (48 kHz, 44.1 kHz and 32kHz)
using the Optical Interface for CD-player
digital output
Three tape inputs with monitor option
Additional recording selector switch for Tape 2/3
tape dubbing way in both directions
Two Aux inputs
front-side connection for Aux 2
switch for the signal path shortening (Digital Direct & Line, Straight)
two speedy MM/MC Phono stage
Continuously variable Loudness