Harman/kardon Citation twenty-four specifications

General

connectors

Tech nical data

special features

number of inputs: 2 RCA jacks
- sensitivity: 1.2 V / impedance: 22 kOhm
number of outputs: 2 x 4 screw-type terminal connectors
- for 2 Pairs of Stereo speaker wires, each of the Plus and Minus Pole

the duration of the performance (total harmonic distortion)
- 8 Ohm s: 100 watts / channel driven, from 20 - 20,000 Hz, less than 0.08% total harmonic distortion
- 4 Ohm s: 100 watts / channel driven, from 20 - 20,000 Hz, below 0.08% Total harmonic distortion
- 8 Ohm s: 200 watts Mono bridged from 20 - 20,000 Hz, under 0,12% total harmonic distortion
dynamic power (IHF 1 kHz Tonspitze, one channel driven)
- 8 Ohm s: 140 watts
- 4 Ohm s: 210 W
- 2 Ohm s: 325 watts
- 8 Ohm s, bridged Mono: 280 W
- 4 Ohm Mono bridged: 420 W
total harmonic distortion:
damping factor at 8 Ohm : 75
frequency response at half the rated power, 8 Ohm : 10 - 100,000 Hz
frequency response at 1 Watt output power, +0/-3dB: 0.1 Hz to 250,000 Hz
signal-to-noise ratio (1 Watt/rated / A-W+d): 100 dB / 115dB
stereo channel separation: -

8 Ohm s: 100 watts / channel driven, from 20 - 20,000 Hz, less than 0.08% total harmonic distortion
4 Ohm s: 100 watts / channel driven, from 20 - 20,000 Hz, below 0.08% Total harmonic distortion
8 Ohm s: 200 watts Mono bridged from 20 - 20,000 Hz, under 0,12% total harmonic distortion

Stereo operation (a956e985535b8d57732d14dfa0e4c71ating Mode 'high-current')
Mono-bridge operation (a956e985535b8d57732d14dfa0e4c71ating Mode 'high voltage')
readiness (Remote Standby)
protective circuit is activated (Protect)
Clipping (Voltage overload)