Remote Control: In/Out Control Trigger Voltage: 3.5-12 Volts
Power Consumption: EU version 1800 watts / US version 750 Watts
Dimensions: 149x 440x 456mm
Weight: approx.27,3kg
Factory price approx.:
Number of inputs:
4x RCA input sensitivity: 1.1V
4x RCA Input sensitivity: 1.1V
Inputs (sensitivity/impedance):
Input Impedance 22k Ohm s
Input Sensitivity 1.1 volts for rated output
Number of outputs:
4x speakers
4x speakers
Continuous power (at total harmonic distortion) < ul>
8 ohms: 4 x 100 watts @ 8 ohms
4 ohms: 4 x 175 watts @ 4 ohms
2 x 100 watts + 1 x 300 watts @ 8 ohms
2 x 300 watts @ 8 ohms bridged
Dynamic power:
8 ohms: 450 watts per channel into 8Ω (stereo), 150W (4 channel)
4 Ohm :
Total harmonic distortion: THD/IMD Less than 0.03% at rated output
Attenuation factor:
Frequency response: 20Hz - 20kHz, .03% THD, all channels driven
Power Bandwidth: < 3Hz - 200kHz ±3dB at rated Frequency Response output
Signal to noise ratio:
Stereo channel separation:
8 Ohm s: 4 x 100 watts @ 8 ohms
4 Ohm s: 4 x 175 watts @ 4 Ohm s
2 x 100 watts + 1 x 300 watts @ 8 Ohm s
2 x 300 watts @ 8 Ohm s bridged
8 Ohm s: 450 watts per channel into 8Ω (stereo), 150W (4 channel)
4 Ohm s:
100 amps/channel in dual mono HCC mode
Harman Kardon Citation 5.1 4/3/2 Channel Amplifier, Discrete Outputs, Individual Power Supplies, USA
Top of the line Harman Kardon Citation 5.1 4/3/2 channel amplifier, built when HK was at the top of their game,
incomparable USA design, craftsmanship, attention to detail, sound quality and performance.
This amp was designed for sound quality and performance, discrete outputs, individual power supplies, low negative feedback,
High Current, real RMS power with high dynamic headroom due to the very beefy power supplies.
You can use it as a 4 channel amp, 3 channel amp or 2 channel amp.
It sounds superb, open, detailed, dynamic, extended, transparent, smooth, natural and musical.
Made in the USA
The Citation® 5.1 may be used as a four, three or two-channel amplifier, with audiophile quality in all configurations.
This flexibility allows you to configure power levels to meet specific system requirements upon initial installation and in later system modifications.
High Current Design Delivers full power to speakers even when matched with complex impedance loads from various speaker configurations.
Low Negative Feedback Improved sonic quality with almost total freedom from TIM (transient intermodulation distortion), THD (total harmonic distortion) and IMD (intermodulation distortion).
Quad Power Supply Four (4) separate power supplies, one for each output channel, eliminate crosstalk among channels and provide the highest possible performance in bridged modes.
Power-up Sequencing When controlled by the remote turn-on system in the 5.0 AV Controller, 5.1 Multi-channel Power Amplifiers in multiple amplifier systems turn on sequentially, each at a slightly different time, reducing power surges in a home's electrical system.
Ultrawide Bandwidth Design Delivers all the subtleties of the source material, even inaudible harmonics that contribute to sonic performance.
A Citation design and engineering hallmark.
Oversize Heat Sinks Fan-free convection cooling assures high system reliability and quiet operation.
THX™ Certified The 5.1 Multichannel Power Amplifier meets or exceeds THX standards for sonic performance in the bridged mode or when used with Dual Drive Dipoles™.
Specifications High current, multichannel audio power amplifier, configurable for four, three or General two-channel output.
THX® certified in Description bridged mode or with Dual -Drive Dipoles.