Yamaha CR-1020 specifications

Category : Receiver

Brand : Yamaha

General

Connections

Technical data

Amplifier

Tuner

Special equipment

  • Manufacturer: Yamaha
  • Model: CR-1020
  • Type: Receiver
  • Years of construction: 1977 - 1979
  • Made in: Japan
  • Color: Silver
  • Remote control: No
  • Power consumption: 520 Watts
  • Dimensions: 521 x 147 x 415 mm (WxHxD)
  • Weight: 18.3 kg
  • Factory price: 1.598,- DM
  • Number of inputs:
    • Antenna, 2xPhono, 2xTape, Aux
  • Number of outputs:
    • 3x speakers, 2x headphones, 2xRec-Out
  • Antenna, 2xPhono, 2xTape, Aux
  • 3x speakers, 2x headphones, 2xRec-Out
  • Continuous power (with total harmonic distortion):
    • 8 643961b8da111c0a15d770a1109a86d4s: 2x 75 Watts
    • 4 643961b8da111c0a15d770a1109a86d4s: 2x 90 Watts
  • Dynamic power:
    • 8 643961b8da111c0a15d770a1109a86d4:
    • 4 643961b8da111c0a15d770a1109a86d4:
  • Total harmonic distortion: 0.01%
  • Attenuation factor: 40
  • Inputs (sensitivity/impedance)
    • Phono mag. I: 2 mV 47 kΩ
    • Phono mag. II: 2 mV 47 kΩ
    • Aux: 120 mV 45 kΩ
    • Band: 2 x 120 mV 45 kΩ
  • Output (level/impedance):
  • Frequency response over all: 10-100,000 Hz (+/- 2.5 dB)
  • Tone Control:
    • Bass: Yes
    • Midrange: Yes
    • Treble: Yes
    • Loudness: Yes, Can be switched off
    • Subsonic: No
  • Mute: Yes
  • Direct/Line-Straight: No
  • Ripple Voltage Distance (Short-circuited):
  • Stereo Channel Separation:
  • Signal-to-noise ratio: 100 dB
  • 8 643961b8da111c0a15d770a1109a86d4s: 2x 75 watts
  • 4 643961b8da111c0a15d770a1109a86d4s: 2x 90 watts
  • 8 643961b8da111c0a15d770a1109a86d4s:
  • 4 643961b8da111c0a15d770a1109a86d4s:
  • Phono mag. I: 2 mV 47 kΩ
  • Phono mag. II: 2 mV 47 kΩ
  • Aux: 120 mV 45 kΩ
  • Band: 2 x 120 mV 45 kΩ
    Bass: Yes
  • Midrange: Yes
  • Treble: Yes
  • Loudness: Yes, can be switched off
  • Subsonic: No
  • Reception ranges:
    • VHF /MW
  • Frequency ranges:
    • VHF: 88-108 MHz
    • MW: 525-1,605kHz
  • Frequency response: 30-15,000 Hz
  • Input Sensitivity: 1.3/40µV (DIN)
  • Total harmonic distortion: 0.25% (Stereo)
  • Signal-to-noise ratio: 67 dB (Stereo)
  • Crosstalk attenuation: 50 dB
  • Selectivity: 60 dB (DIN)
  • Common-wave selection: 1 dB
  • Side-wave selection: 75 dB
  • Mirror frequency attenuation: 85 dB
  • IF Attenuation: 90 dB
  • AM Suppression: 65 dB
  • Output Level:
  • RDS: No
  • Station Memory: No
  • VHF /MW
  • VHF: 88-108 MHz
  • MW: 525-1.605 kHz
    High-Filter
  • Low-Filter
  • Mono/Stereo/Stereo Reverse switchable
  • Record-Selector
  • Transmitter Center Indicator
  • Excerpt from brochure: Yamaha CR- 1020
  • Device presentation at good-old-hifi:[1]

Yamaha CR-1020

Yamaha CR-1020


Comment:



Comment box:


Yamaha CR-1020 relate